Try the noapic option or other suggestions in the FAQ for "address not accepting address".
On Thu, 26 Feb 2004, wim delvaux wrote: > On Tuesday 24 February 2004 07:43, Stephen J. Gowdy wrote: > > cat /proc/interupts > > > > The number should increase. If you host controller shares an interupts > > with another device it isn't so easy to tell unless you can deactivate > > that other device. > > Unfortunately it does share irq with eth0 of all devices ... so lots of > interrupts. > > dmesg shows (and after this no insert generates messages) > > usb 2-1: unregistering device > drivers/usb/core/usb.c: usb_hotplug > ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [1] = 0x00020100 PESC PPS > hub 2-0:1.0: port 1 enable change, status 100 > ehci_hcd 0000:00:03.3: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC > hub 1-0:1.0: port 2, status 0, change 1, 12 Mb/s > ehci_hcd 0000:00:03.3: GetStatus port 4 status 003002 POWER OWNER sig=se0 CSC > hub 1-0:1.0: port 4, status 0, change 1, 12 Mb/s > ehci_hcd 0000:00:03.3: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT > hub 1-0:1.0: port 6, status 501, change 1, 480 Mb/s > hub 1-0:1.0: debounce: port 6: delay 100ms stable 4 status 0x501 > ehci_hcd 0000:00:03.3: port 6 full speed --> companion > ehci_hcd 0000:00:03.3: GetStatus port 6 status 003801 POWER OWNER sig=j > CONNECT > ohci_hcd 0000:00:03.2: GetStatus roothub.portstatus [2] = 0x00010101 CSC PPS > CCS > hub 4-0:1.0: port 2, status 101, change 1, 12 Mb/s > hub 4-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x101 > ohci_hcd 0000:00:03.2: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS > PES CCS > hub 4-0:1.0: new USB device on port 2, assigned address 2 > usb 4-2: control timeout on ep0out > ohci_hcd 0000:00:03.2: Unlink after no-IRQ? Different ACPI or APIC settings > may help. > > > > ------------------------------------------------------- > SF.Net is sponsored by: Speed Start Your Linux Apps Now. > Build and deploy apps & Web services for Linux with > a free DVD software kit from IBM. Click Now! > http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
