Hmm, so the mouse works but the keyboard doesn't? Strange as they use much of the same USB framework. The mouse is using the HID driver too? Can you send a list of modules loaded (you probably did already but it is worth seeing this again with your current situation)? I've not used 2.6.x much myself yet so it could be a 2.6 problem. 2.6.2 failed to boot on my laptop. I'll try harder later today...
On Sun, 14 Mar 2004, Marcin Fusinski wrote: > Hello, > > First of all, sorry about the delay (work...). > > On Thu, 11 Mar 2004, Stephen J. Gowdy wrote: > > The above is another name for USB Legacy. Try turning that off. > <CUT> > Unfortunately it doesn't help. I'm still getting: > > input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on > usb-0000:00:10.1-2 > usb 2-2: registering 2-2:1.1 (config #1, interface 1) > drivers/usb/core/usb.c: usb_hotplug > hid 2-2:1.1: usb_probe_interface > hid 2-2:1.1: usb_probe_interface - got id > uhci_hcd 0000:00:10.1: uhci_result_control: failed with status 500000 > [df51c2a0] link (1f51c1b2) element (1f52f1c0) > Element != First TD > 0: [df52f180] link (1f52f1c0) e3 LS Length=7 MaxLen=7 DT0 EndPt=0 > Dev=3, PID=2d(SETUP) (buf=1f5a5160) > 1: [df52f1c0] link (1f52f200) e3 LS Stalled Babble Length=1 > MaxLen=1 DT1 EndPt=0 Dev=3, PID=69(IN) (buf=1f5a5180) > 2: [df52f200] link (00000001) e3 LS IOC Active Length=0 > MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000) > > drivers/usb/input/hid-core.c: ctrl urb status -75 received > > USB mouse plugged into port next to the keyboard works just fine. > > Thanks for trying. > > Best Regards, > > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
