On Fri, 2 Apr 2004, Petri T. Koistinen wrote: > On Thu, 1 Apr 2004, Alan Stern wrote: > > > Can you send the contents of /proc/driver/uhci/0000:00:09.0 after one of > > those messages appears? > > $ cat /proc/driver/uhci/0000\:00\:09.0 > HC status > usbcmd = 00c0 Maxp64 CF > usbstat = 0020 HCHalted > usbint = 000f > usbfrnum = (1)b10 > flbaseadd = 1fd2c000 > sof = 40 > stat1 = 05a5 OverCurrent LowSpeed Enabled Connected > stat2 = 048a OverCurrent EnableChange ConnectChange > Frame List > Skeleton QH's > > > After that message appears, if you unplug and replug in your mouse, does > > it start working again? > > For some reason, I didn't need to unplug and replug mouse this time, mouse kept > working. I am running now 2.6.5-rc3/cvs.
I don't understand. Either your mouse isn't attached to that particular controller or else it magically came back to life all by itself. That HCHalted indicates that the controller is stopped, not running. It can't possibly send messages between the computer and the mouse in that state. Alan Stern ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
