You can add that device to the usb.usermap file in /etc/hotplug. On Sun, 4 Apr 2004, Bernd Broermann wrote:
> Hi, > I have a more or less a user question. > My device is a Vodafone 3G/UMTS Datacard. > The card works when I modify the modules.conf like a usbseriel device. > > How can I use it with hotplug mechanism ? > I am using SuSE 9.0 , hotplug-2002_08_26. > > See also : http://www.kuix.de/umts/vodafone/ > > Thanks > Bernd > > > > when i plug it in i get > Apr 2 14:11:23 vaio kernel: hub.c: new USB device 07:00.0-1, assigned > address 3 > Apr 2 14:11:23 vaio kernel: usb.c: USB device 3 (vend/prod > 0xaf0/0x5000) is not claimed by any active dr > > after putting > options usbserial vendor=0xaf0 product=0x5000 > in /etc/modules.conf : > > Apr 2 18:36:33 vaio kernel: hub.c: new USB device 07:00.0-1, assigned > address 3 > Apr 2 18:36:33 vaio kernel: usbserial.c: Generic converter detected > Apr 2 18:36:33 vaio kernel: usbserial.c: Generic converter now attached > to ttyUSB0 (or usb/tts/0 for devfs) > Apr 2 18:36:33 vaio kernel: usbserial.c: Generic converter detected > Apr 2 18:36:33 vaio kernel: usbserial.c: Generic converter now attached > to ttyUSB1 (or usb/tts/1 for devfs) > Apr 2 18:36:33 vaio kernel: usbserial.c: Generic converter detected > Apr 2 18:36:33 vaio kernel: usbserial.c: Generic converter now attached > to ttyUSB2 (or usb/tts/2 for devfs) > > Then I can use it like a modem. > > > cat /proc/bus/usb/devices > ...... > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1 > P: Vendor=0af0 ProdID=5000 Rev= 0.00 > S: Manufacturer=Vodafone > S: Product=Vodafone Mobile Connect Card - 3G > S: SerialNumber=Serial Number > ...... > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: IBM Linux Tutorials > Free Linux tutorial presented by Daniel Robbins, President and CEO of > GenToo technologies. Learn everything from fundamentals to system > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
