You either a BIOS or PCI problem as you are getting no interups for USB. You could try a BIOS update or check earlier in your logs for information from the PCI system. If you need more helptry the linux-kernel list.
On Tue, 20 Apr 2004, Seika van Olstroem wrote: > Hello, > > cat /proc/interrupts says: > > CPU0 > 0: 786205 IO-APIC-edge timer > 1: 1019 IO-APIC-edge i8042 > 2: 0 XT-PIC cascade > 8: 1 IO-APIC-edge rtc > 9: 0 IO-APIC-level acpi > 12: 35303 IO-APIC-edge i8042 > 14: 8440 IO-APIC-edge ide0 > 15: 79 IO-APIC-edge ide1 > 16: 65973 IO-APIC-level CMI8738-MC6, nvidia > 17: 2625 IO-APIC-level eth0 > 21: 0 IO-APIC-level uhci_hcd, uhci_hcd, uhci_hcd > NMI: 0 > LOC: 786148 > ERR: 0 > MIS: 0 > > /var/log/messages says: > > drivers/usb/core/usb.c: registered new driver usbfs > drivers/usb/core/usb.c: registered new driver hub > USB Universal Host Controller Interface driver v2.2 > uhci_hcd 0000:00:10.0: VIA Technologies, Inc. USB > uhci_hcd 0000:00:10.0: irq 21, io base 0000dc00 > uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > uhci_hcd 0000:00:10.1: VIA Technologies, Inc. USB (#2) > uhci_hcd 0000:00:10.1: irq 21, io base 0000e000 > uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > uhci_hcd 0000:00:10.2: VIA Technologies, Inc. USB (#3) > uhci_hcd 0000:00:10.2: irq 21, io base 0000e400 > uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > drivers/usb/core/usb.c: registered new driver hiddev > drivers/usb/core/usb.c: registered new driver hid > drivers/usb/input/hid-core.c: v2.0:USB HID core driver > mice: PS/2 mouse device common for all mice > > if i disconnect the mouse, /var/log/messages says: > > irq 21: nobody cared! > Call Trace: > [<c010b60a>] __report_bad_irq+0x2a/0x90 > [<c010b6fc>] note_interrupt+0x6c/0xa0 > [<c010b9d1>] do_IRQ+0x121/0x130 > [<c0109cf4>] common_interrupt+0x18/0x20 > [<c0107053>] default_idle+0x23/0x30 > [<c01070bc>] cpu_idle+0x2c/0x40 > [<c031a7d7>] start_kernel+0x197/0x1e0 > [<c031a4a0>] unknown_bootoption+0x0/0x160 > > handlers: > [<e092ac40>] (usb_hcd_irq+0x0/0x70 [usbcore]) > [<e092ac40>] (usb_hcd_irq+0x0/0x70 [usbcore]) > [<e092ac40>] (usb_hcd_irq+0x0/0x70 [usbcore]) > Disabling IRQ #21 > > > Stephen J. Gowdy wrote: > > >What is in /proc/interupts? What is in your log files? > > > >On Mon, 19 Apr 2004, Seika van Olstroem wrote: > > > > > > > >>Hello List, > >> > >>today i've upgraded to Linux Kernel 2.6.5 from 2.6.0 (using Debian 3.0). > >> > >>Everything works fine, except my USB mouse. The usb controller didn't > >>recognize > >>the mouse. > >> > >>cat /proc/bus/usb/devices says: > >> > >>T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > >>B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > >>D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > >>P: Vendor=0000 ProdID=0000 Rev= 2.06 > >>S: Manufacturer=Linux 2.6.5-1-k7 uhci_hcd > >>S: Product=VIA Technologies, Inc. USB (#3) > >>S: SerialNumber=0000:00:10.2 > >>C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > >>I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > >>E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > >> > >>T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > >>B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > >>D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > >>P: Vendor=0000 ProdID=0000 Rev= 2.06 > >>S: Manufacturer=Linux 2.6.5-1-k7 uhci_hcd > >>S: Product=VIA Technologies, Inc. USB (#2) > >>S: SerialNumber=0000:00:10.1 > >>C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > >>I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > >>E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > >> > >>T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > >>B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > >>D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > >>P: Vendor=0000 ProdID=0000 Rev= 2.06 > >>S: Manufacturer=Linux 2.6.5-1-k7 uhci_hcd > >>S: Product=VIA Technologies, Inc. USB > >>S: SerialNumber=0000:00:10.0 > >>C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > >>I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > >>E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > >> > >> > >>I've loaded all drivers: > >>lsmod says: > >>floppy 60564 0 > >>snd_mixer_oss 19840 0 > >>psmouse 20296 0 > >>msr 2880 0 > >>cpuid 2432 0 > >>sd_mod 21056 0 > >>scsi_mod 120972 1 sd_mod > >>ide_cd 41860 0 > >>cdrom 40928 1 ide_cd > >>ipv6 251648 12 > >>ds 18500 0 > >>pcmcia_core 67204 1 ds > >>snd_cmipci 36020 0 > >>snd_pcm 98020 1 snd_cmipci > >>snd_page_alloc 11332 1 snd_pcm > >>snd_opl3_lib 11200 1 snd_cmipci > >>snd_timer 25860 2 snd_pcm,snd_opl3_lib > >>snd_hwdep 9504 1 snd_opl3_lib > >>gameport 4736 1 snd_cmipci > >>snd_mpu401_uart 7872 1 snd_cmipci > >>snd_rawmidi 25120 1 snd_mpu401_uart > >>snd_seq_device 8136 2 snd_opl3_lib,snd_rawmidi > >>snd 55972 9 > >>snd_mixer_oss,snd_cmipci,snd_pcm,snd_opl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device > >>soundcore 10272 1 snd > >>rtc 12728 0 > >>8139too 26048 0 > >>mii 5184 1 8139too > >>crc32 4352 1 8139too > >>loop 16520 0 > >>nvidia 2071144 12 > >>mousedev 10004 1 > >>hid 33664 0 > >>uhci_hcd 32656 0 > >>usbcore 105692 4 hid,uhci_hcd > >>ide_disk 19264 5 > >>ide_generic 1344 0 [permanent] > >>via82cxxx 14044 1 > >>atiixp 8600 0 [permanent] > >>ide_core 148960 5 ide_cd,ide_disk,ide_generic,via82cxxx,atiixp > >>unix 28464 269 > >>font 8448 0 > >>cfbcopyarea 3840 0 > >>cfbimgblt 3072 0 > >>cfbfillrect 3712 0 > >>ext3 120552 3 > >>jbd 61400 1 ext3 > >>ext2 72296 0 > >>mbcache 9092 2 ext3,ext2 > >> > >>If i disconnect my USB mouse i get a kernel trace and this message: > >>irq 21: nobody cared! > >>and that the irq is disabled. > >> > >>The mouse is a Logitech Mini Wheel Mouse. > >> > >>Please help me. If more information are needed write me. > >> > >>Thanks a lot. > >> > >>best regards, > >>Seika > >> > >> > >>------------------------------------------------------- > >>This SF.Net email is sponsored by: IBM Linux Tutorials > >>Free Linux tutorial presented by Daniel Robbins, President and CEO of > >>GenToo technologies. Learn everything from fundamentals to system > >>administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click > >>_______________________________________________ > >>[EMAIL PROTECTED] > >>To unsubscribe, use the last form field at: > >>https://lists.sourceforge.net/lists/listinfo/linux-usb-users > >> > >> > >> > > > >-- > > /------------------------------------+-------------------------\ > >|Stephen J. Gowdy | SLAC, MailStop 34, | > >|http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | > >|http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | > >|EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | > > \------------------------------------+-------------------------/ > > > > > >------------------------------------------------------- > >This SF.Net email is sponsored by: IBM Linux Tutorials > >Free Linux tutorial presented by Daniel Robbins, President and CEO of > >GenToo technologies. Learn everything from fundamentals to system > >administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click > >_______________________________________________ > >[EMAIL PROTECTED] > >To unsubscribe, use the last form field at: > >https://lists.sourceforge.net/lists/listinfo/linux-usb-users > > > > > > > > > best regards, > Seika > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
