Hi,

i have encountered more printing problems, this time with a Canon i865
printer.

I have the following setup:

vanilla 2.4.26

00:1f.2 USB Controller: Intel Corporation 82820 820 (Camino 2) Chipset USB (Hub 
        Subsystem: Intel Corporation 82820 820 (Camino 2) Chipset USB (Hub A)
        Flags: bus master, medium devsel, latency 0, IRQ 9
        I/O ports at d000 [size=32]

00:1f.4 USB Controller: Intel Corporation 82820 820 (Camino 2) Chipset USB (Hub 
        Subsystem: Intel Corporation: Unknown device 2442
        Flags: bus master, medium devsel, latency 0, IRQ 5
        I/O ports at d800 [size=32]

Both usb ports work basically, usb-storage and a mouse work properly
without errors. Both IRQs are shared with other devices.
Any hints what could cause the writes to timeout?


Apr 20 10:45:33 nop kernel:  Element != First TD
Apr 20 10:45:33 nop kernel:   0: [c39db000] link (039db030) e3 Length=7 MaxLen=7 DT0 
EndPt=0 Dev=3, PID=2d(SETUP) (buf=09f95b94)
Apr 20 10:45:33 nop kernel:   1: [c39db030] link (039db060) e0 SPD Stalled CRC/Timeo 
Length=7ff MaxLen=0 DT1 EndPt=0 Dev=3, PID=69(IN) (buf=047f03c4)
Apr 20 10:45:33 nop kernel:   2: [c39db060] link (00000001) e3 IOC Active Length=0 
MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)
Apr 20 10:45:33 nop kernel: 
Apr 20 10:45:33 nop kernel: printer.c: usblp0: error -84 reading printer status
Apr 20 10:45:33 nop kernel: uhci.c: uhci_result_control() failed with status 440000
Apr 20 10:45:33 nop kernel: [cce6d0f0] link (0ce6d062) element (039db000)
Apr 20 10:45:33 nop kernel:   0: [c39db000] link (039db030) e0 Stalled CRC/Timeo 
Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=09f95b94)
Apr 20 10:45:33 nop kernel:   1: [c39db030] link (039db060) e3 SPD Active Length=0 
MaxLen=0 DT1 EndPt=0 Dev=3, PID=69(IN) (buf=047f03c4)
Apr 20 10:45:33 nop kernel:   2: [c39db060] link (00000001) e3 IOC Active Length=0 
MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)
Apr 20 10:45:33 nop kernel: 
Apr 20 10:45:33 nop kernel: printer.c: usblp0: error -110 reading printer status
Apr 20 10:45:33 nop kernel: uhci.c: uhci_result_control() failed with status 440000
Apr 20 10:45:33 nop kernel: [cce6d0f0] link (0ce6d062) element (039db000)
Apr 20 10:45:33 nop kernel:   0: [c39db000] link (039db030) e0 Stalled CRC/Timeo 
Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=09f95b94)
Apr 20 10:45:33 nop kernel:   1: [c39db030] link (039db060) e3 SPD Active Length=0 
MaxLen=0 DT1 EndPt=0 Dev=3, PID=69(IN) (buf=047f03c4)
Apr 20 10:45:33 nop kernel:   2: [c39db060] link (00000001) e3 IOC Active Length=0 
MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)

My printer:

Manufacturer: Canon
Product: i865
SerialNumber: 216WK7
usb.c: unhandled interfaces on device
usb.c: USB device 4 (vend/prod 0x4a9/0x107f) is not claimed by any active driver.
  Length              = 18
  DescriptorType      = 01
  USB version         = 1.10
  Vendor:Product      = 04a9:107f
  MaxPacketSize0      = 64
  NumConfigurations   = 1
  Device version      = 1.13
  Device Class:SubClass:Protocol = 00:00:00
    Per-interface classes
Configuration:
  bLength             =    9
  bDescriptorType     =   02
  wTotalLength        = 0020
  bNumInterfaces      =   01
  bConfigurationValue =   01
  iConfiguration      =   00
  bmAttributes        =   c0
  MaxPower            =    2mA

  Interface: 0
  Alternate Setting:  0
    bLength             =    9
    bDescriptorType     =   04
    bInterfaceNumber    =   00
    bAlternateSetting   =   00
    bNumEndpoints       =   02
    bInterface Class:SubClass:Protocol =   07:01:02
    iInterface          =   00
    Endpoint:
      bLength             =    7
      bDescriptorType     =   05
      bEndpointAddress    =   01 (out)
      bmAttributes        =   02 (Bulk)
      wMaxPacketSize      = 0040
      bInterval           =   00
    Endpoint:
      bLength             =    7
      bDescriptorType     =   05
      bEndpointAddress    =   82 (in)
      bmAttributes        =   02 (Bulk)
      wMaxPacketSize      = 0040
      bInterval           =   00

cheers, alex
-- 
alexander goller    [EMAIL PROTECTED]


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to