THere is more than one archive. Did you try the other one? On Thu, 29 Apr 2004, Samuel Abels wrote:
> Hello, > > I am trying to get my new digital camera work as an usb storage device. > When I plug the usb cable in, this is what happens: > > $ tail -f /var/log/messages > usb 1-3: new high speed USB device using address 2 > usb 1-3: control timeout on ep0in > usb 1-3: new high speed USB device using address 3 > usb 1-3: control timeout on ep0in > usb 1-3: new high speed USB device using address 4 > usb 1-3: control timeout on ep0in > [...] > > This happens with Kernel 2.6.4 and 2.6.5 as well. > The device is Minolta Dimage A2. > > Some more infos appended below. > Using Google I have found many users having the same problem with other > devices, but I have not found a solution. > > Sorry if this has already been answered, but the sourceforge mailinglist > archives really suck, so you will have to read it again. > > Help greatly appreciated. > > Thanks, > -Samuel > > > ----------------------------------------------------- > $ lspci -v | grep -i usb > 0000:00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev > 01) (prog-if 00 [UHCI]) > 0000:00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev > 01) (prog-if 00 [UHCI]) > 0000:00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev > 01) (prog-if 00 [UHCI]) > 0000:00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI > Controller (rev 01) (prog-if 20 [EHCI]) > > > $ dmesg | grep -i usb > drivers/usb/core/usb.c: registered new driver usbfs > drivers/usb/core/usb.c: registered new driver hub > ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB USB2 > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 > hub 1-0:1.0: USB hub found > USB Universal Host Controller Interface driver v2.2 > uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB USB (Hub #1) > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > hub 2-0:1.0: USB hub found > uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB USB (Hub #2) > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > hub 3-0:1.0: USB hub found > uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB USB (Hub #3) > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > hub 4-0:1.0: USB hub found > drivers/usb/core/usb.c: registered new driver midi > drivers/usb/core/usb.c: registered new driver usblp > drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver > Initializing USB Mass Storage driver... > drivers/usb/core/usb.c: registered new driver usb-storage > USB Mass Storage support registered. > drivers/usb/core/usb.c: registered new driver hiddev > drivers/usb/core/usb.c: registered new driver hid > drivers/usb/input/hid-core.c: v2.0:USB HID core driver > > > $ grep -i usb /boot/config-2.6.5 > # ALSA USB devices > # CONFIG_SND_USB_AUDIO is not set > # USB support > CONFIG_USB=y > # CONFIG_USB_DEBUG is not set > # Miscellaneous USB options > CONFIG_USB_DEVICEFS=y > # CONFIG_USB_BANDWIDTH is not set > # CONFIG_USB_DYNAMIC_MINORS is not set > # USB Host Controller Drivers > CONFIG_USB_EHCI_HCD=y > # CONFIG_USB_EHCI_SPLIT_ISO is not set > # CONFIG_USB_OHCI_HCD is not set > CONFIG_USB_UHCI_HCD=y > # USB Device Class drivers > # CONFIG_USB_AUDIO is not set > # CONFIG_USB_BLUETOOTH_TTY is not set > CONFIG_USB_MIDI=y > # CONFIG_USB_ACM is not set > CONFIG_USB_PRINTER=y > CONFIG_USB_STORAGE=y > # CONFIG_USB_STORAGE_DEBUG is not set > # CONFIG_USB_STORAGE_DATAFAB is not set > # CONFIG_USB_STORAGE_FREECOM is not set > # CONFIG_USB_STORAGE_ISD200 is not set > # CONFIG_USB_STORAGE_DPCM is not set > # CONFIG_USB_STORAGE_HP8200e is not set > # CONFIG_USB_STORAGE_SDDR09 is not set > # CONFIG_USB_STORAGE_SDDR55 is not set > # CONFIG_USB_STORAGE_JUMPSHOT is not set > # USB Human Interface Devices (HID) > CONFIG_USB_HID=y > CONFIG_USB_HIDINPUT=y > CONFIG_USB_HIDDEV=y > # CONFIG_USB_AIPTEK is not set > # CONFIG_USB_WACOM is not set > # CONFIG_USB_KBTAB is not set > # CONFIG_USB_POWERMATE is not set > # CONFIG_USB_MTOUCH is not set > # CONFIG_USB_XPAD is not set > # CONFIG_USB_ATI_REMOTE is not set > # USB Imaging devices > # CONFIG_USB_MDC800 is not set > # CONFIG_USB_MICROTEK is not set > # CONFIG_USB_HPUSBSCSI is not set > # USB Multimedia devices > # Video4Linux support is needed for USB Multimedia device support > # USB Network adaptors > # CONFIG_USB_CATC is not set > # CONFIG_USB_KAWETH is not set > # CONFIG_USB_PEGASUS is not set > # CONFIG_USB_RTL8150 is not set > # CONFIG_USB_USBNET is not set > # USB port drivers > # USB Serial Converter support > # CONFIG_USB_SERIAL is not set > # USB Miscellaneous drivers > # CONFIG_USB_EMI62 is not set > # CONFIG_USB_EMI26 is not set > # CONFIG_USB_TIGL is not set > # CONFIG_USB_AUERSWALD is not set > # CONFIG_USB_RIO500 is not set > # CONFIG_USB_LEGOTOWER is not set > # CONFIG_USB_LCD is not set > # CONFIG_USB_LED is not set > # CONFIG_USB_TEST is not set > # USB Gadget Support > # CONFIG_USB_GADGET is not set > $ > > > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
