Hardware:
Tyan S2460, dual MP 2000's, 512MB ram, USB 1.1
Running 2.6.6 with:
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
### after: "modprobe usb-storage", /var/log/syslog says:
... kernel: Initializing USB Mass Storage driver...
... kernel: usbcore: registered new driver usb-storage
... kernel: USB Mass Storage support registered.
### after: "modprobe ohci-hcd-storage", /var/log/syslog says:
... kernel: ohci_hcd 0000:00:07.4: Advanced Micro Devices [AMD]
AMD-766 [ViperPlus] USB
... kernel: ohci_hcd 0000:00:07.4: irq 11, pci mem c00dc000
... kernel: ohci_hcd 0000:00:07.4: new USB bus registered, assigned
bus number 1
... kernel: usb usb1: Product: Advanced Micro Devices [AMD] AMD-766
[ViperPlus] USB
... kernel: usb usb1: Manufacturer: Linux 2.6.6-smp ohci_hcd
... kernel: usb usb1: SerialNumber: 0000:00:07.4
... kernel: hub 1-0:1.0: USB hub found
... kernel: hub 1-0:1.0: 4 ports detected
... usb.agent[5356]: ... no modules for USB product 0/0/206
### Insert usb key (SanDisk 256MB memory stick):
in slot 1:
... kernel: hub 1-0:1.0: Cannot enable port 1. Maybe the USB
cable is bad?
in slot 2:
... kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB
cable is bad?
Question: how to get usb driver to accept device?
TIA,
David
-------------------------------------------------------
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
