It claims to be USB1 (the Spd=12 and Ver=1.10). On Sat, 15 May 2004, Edouard Gomez wrote:
> Hello, > > I have an usb 2 branded key that is indeed working fine and > at USB2 transfer rates with my brothers' Win32 OS. But on my > Linux box, the usb-storage key is only detected by the uchi-hcd > module. If i just load ehci-hcd, then the usb-storage device is > never detected. > > Is there a way to know why this USB2 device is detected as being > an USB1.1 device ? > > Any advise is welcome. Thanks. > > Here is the output of /proc/bus/usb/devices: > T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.06 > S: Manufacturer=Linux 2.6.6 uhci_hcd > S: Product=VIA Technologies, Inc. USB (#3) > S: SerialNumber=0000:00:10.2 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0c76 ProdID=0007 Rev= 1.00 > S: Manufacturer=ACG Tek > S: Product=uflash disk > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=10ms > > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.06 > S: Manufacturer=Linux 2.6.6 uhci_hcd > S: Product=VIA Technologies, Inc. USB (#2) > S: SerialNumber=0000:00:10.1 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.06 > S: Manufacturer=Linux 2.6.6 uhci_hcd > S: Product=VIA Technologies, Inc. USB > S: SerialNumber=0000:00:10.0 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 > B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.06 > S: Manufacturer=Linux 2.6.6 ehci_hcd > S: Product=VIA Technologies, Inc. USB 2.0 > S: SerialNumber=0000:00:10.3 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms > > And the output of the usb-storage module: > scsi9 : SCSI emulation for USB Mass Storage devices > Vendor: ACG Tek Model: uflash disk Rev: 1.00 > Type: Direct-Access ANSI SCSI revision: 02 > SCSI device sda: 512000 512-byte hdwr sectors (262 MB) > sda: assuming Write Enabled > sda: assuming drive cache: write through > > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.Net email is sponsored by: SourceForge.net Broadband Sign-up now for SourceForge Broadband and get the fastest 6.0/768 connection for only $19.95/mo for the first 3 months! http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
