On Fri, 21 May 2004, Kevin Price wrote: > Hi Alan, > > thanks for your patch. Results: > > this patch made hotplug work with the device,
Good. I've submitted it for inclusion in 2.6.7. > but coldplug makes > trouble. I compiled a vanilla debian 2.6.6 kernel with your patch and > the debian maintainer's options, except the CPU optimisation (PIII) and > debug enabled for USB and usb-storage. > > In any case, I get a whole lot of messages from usb-storage: > usb-storage: *** thread sleeping. > usb-storage: *** thread awakened. Those appear during normal operation, together with a lot of other stuff, each time a command is sent to the device. If you turn usb-storage debugging back off again they won't be generated. > When booting the machine with the mpin3 plugged in and the hotplug > script enabled, the system stops for about a minute during the boot > process, and then continues. The device shows up in lsusb, but I cannot > use it. > > With hotplug disabled and uhci_hcd loaded manually, i get the results > down below. Is this now a usb-storage problem? > > Thanks for any help > > Regards > Kevin Both the log excerpts you included look perfectly normal, except that the second (coldplug) one was apparently cut short. Apart from that I can't really say anything, since it all looks correct as far as it goes. What happened after that last "Attempting to get CSW..." message? Even if there was no response from your device the command should have been aborted after a few seconds. Alan Stern ------------------------------------------------------- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
