Hi, (please CC directly to me)
Kernel: vanilla 2.6.7 Dell Inspiron 5150 laptop CPU: P4 HT 3.0Ghz ACPI disabled
The oops is attached, and also a ksymoops on the oops.
It happens when I plug a freebox (usbnet hardware) (ID 10eb:0001). The problem is not happening on 2.4.x but it seems to happen with the latest 2.6.[67], earlier 2.6.x were not recognizing the network adapter.
Best regards,
Guilhem Lavaux.
lsmod:
Module Size Used by
sg 39328 0
st 39836 0
sr_mod 18852 0
sd_mod 22144 0
scsi_mod 122828 4 sg,st,sr_mod,sd_mod
nvidia 2075432 14
parport_pc 35264 0
lp 12488 0
parport 41544 2 parport_pc,lp
ipv6 252384 8
snd_seq_oss 34048 0
snd_seq_midi_event 8064 1 snd_seq_oss
snd_seq 52880 4 snd_seq_oss,snd_seq_midi_event
snd_pcm_oss 53544 0
snd_mixer_oss 19712 1 snd_pcm_oss
snd_intel8x0 36396 0
snd_ac97_codec 68484 1 snd_intel8x0
snd_pcm 96548 2 snd_pcm_oss,snd_intel8x0
snd_timer 25732 2 snd_seq,snd_pcm
snd_page_alloc 11912 2 snd_intel8x0,snd_pcm
gameport 4864 1 snd_intel8x0
snd_mpu401_uart 8192 1 snd_intel8x0
snd_rawmidi 25280 1 snd_mpu401_uart
snd_seq_device 8456 3 snd_seq_oss,snd_seq,snd_rawmidi
snd 56548 12 snd_seq_oss,snd_seq_midi_event,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 10464 1 snd
af_packet 22152 2
raw 8832 1
ide_floppy 19200 0
ide_tape 36816 0
ide_cd 42756 0
cdrom 39584 2 sr_mod,ide_cd
ds 18692 2
yenta_socket 21376 0
pcmcia_core 67140 2 ds,yenta_socket
b44 22020 0
mii 5376 1 b44
ohci1394 35972 0
ieee1394 320696 1 ohci1394
nls_iso8859_1 4352 1
ntfs 90316 1
intel_agp 19868 1
agpgart 33448 2 intel_agp
ehci_hcd 29572 0
uhci_hcd 32400 0
usbcore 112736 4 ehci_hcd,uhci_hcd
rtc 12984 0
lspci -vvv:
00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02)
Subsystem: Dell Computer Corporation: Unknown device 015f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [40] #09 [1105]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
00:00.1 System peripheral: Intel Corp.: Unknown device 3584 (rev 02)
Subsystem: Dell Computer Corporation: Unknown device 015f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.3 System peripheral: Intel Corp.: Unknown device 3585 (rev 02)
Subsystem: Dell Computer Corporation: Unknown device 015f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.0 PCI bridge: Intel Corp.: Unknown device 3581 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fc000000-fdffffff
Prefetchable memory behind bridge: d0000000-dfffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Computer Corporation: Unknown device 015f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at bf80 [size=32]
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Computer Corporation: Unknown device 015f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at bf40 [size=32]
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Computer Corporation: Unknown device 015f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at bf20 [size=32]
00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell Computer Corporation: Unknown device 015f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 0: Memory at f4fffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #0a [2080]
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000efff
Memory behind bridge: f6000000-fbffffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801DBM Ultra ATA Storage Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Computer Corporation: Unknown device 015f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <ignored>
Region 3: I/O ports at <ignored>
Region 4: I/O ports at bfa0 [size=16]
Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio Controller (rev 01)
Subsystem: Dell Computer Corporation: Unknown device 015f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at b800 [size=256]
Region 1: I/O ports at bc40 [size=64]
Region 2: Memory at f4fff800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at f4fff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem Controller (rev 01) (prog-if 00 [Generic])
Subsystem: Broadcom Corporation: Unknown device 4d64
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at b400 [size=256]
Region 1: I/O ports at b080 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0324 (rev a1) (prog-if 00 [VGA])
Subsystem: Dell Computer Corporation: Unknown device 015f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
02:01.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
Subsystem: Dell Computer Corporation: Unknown device 015f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: Memory at faffe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
02:02.0 Network controller: Broadcom Corporation BCM94306 802.11g (rev 02)
Subsystem: Dell Computer Corporation: Unknown device 0001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: Memory at faffc000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
02:04.0 CardBus bridge: Texas Instruments PCI4510 PC card Cardbus Controller (rev 02)
Subsystem: Dell Computer Corporation: Unknown device 015f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, cache line size 20
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 20001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 20400000-207ff000 (prefetchable)
Memory window 1: 20800000-20bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
02:04.1 FireWire (IEEE 1394): Texas Instruments PCI4510 IEEE-1394 Controller (prog-if 10 [OHCI])
Subsystem: Dell Computer Corporation: Unknown device 015f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at faffb800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at faff4000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
ksymoops 2.4.9 on i686 2.6.7. Options used
-V (default)
-k /proc/kallsyms (specified)
-l /proc/modules (default)
-o /lib/modules/2.6.7/ (default)
-m /boot/System.map-2.6.7 (default)
Warning (read_ksyms): no kernel symbols in ksyms, is /proc/kallsyms a valid ksyms file?
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Unable to handle kernel paging request at virtual address 31206e79
e0e663fa
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<e0e663fa>] Tainted: P
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282 (2.6.7)
eax: 31206e75 ebx: c15c9400 ecx: 00000040 edx: cdbd2000
esi: e0e66db2 edi: cdc24c06 ebp: c4913ed8 esp: c4913ea0
ds: 007b es: 007b ss: 0068
Stack: c15c9400 c147f338 00000006 c0190229 c4685e30 cdbd2000 cdbd20cc ffffffb5
e0e66700 cd0c1120 cdc24c00 e0e69940 c147f338 ffffffed c4913ef4 e0a05064
c147f338 e0e66bc4 e0e69960 c147f348 ffffffed c4913f10 c02c3290 c147f348
Call Trace:
[<c0106cbb>] show_stack+0xaf/0xb7
[<c0106e3d>] show_registers+0x15a/0x1bb
[<c0106fc1>] die+0x8c/0xfd
[<c0119039>] do_page_fault+0x3cc/0x570
[<c0106925>] error_code+0x2d/0x38
[<e0a05064>] usb_probe_interface+0x56/0x67 [usbcore]
[<c02c3290>] bus_match+0x3d/0x72
[<c02c33b9>] driver_attach+0x54/0x92
[<c02c3647>] bus_add_driver+0x8f/0xae
[<c02c3a7b>] driver_register+0x31/0x33
[<e0a05128>] usb_register+0x40/0x92 [usbcore]
[<e0de4036>] usbnet_init+0x36/0x38 [usbnet]
[<c0132cf5>] sys_init_module+0x10a/0x249
[<c0105ea9>] sysenter_past_esp+0x52/0x71
Code: f6 40 04 20 0f 84 18 ff ff ff 8b 55 f0 f6 82 8c 00 00 00 02
>>EIP; e0e663fa <__crc_dquot_drop+52a636/762c1f> <=====
>>eax; 31206e75 <__crc_neigh_update_hhs+731fda/883f56>
>>ebx; c15c9400 <__crc_ide_ata66_check+2e91a5/627095>
>>edx; cdbd2000 <__crc_nf_reinject+1b0819/838170>
>>esi; e0e66db2 <__crc_dquot_drop+52afee/762c1f>
>>edi; cdc24c06 <__crc_nf_reinject+20341f/838170>
>>ebp; c4913ed8 <__crc_cap_capable+6847af/6a8de3>
>>esp; c4913ea0 <__crc_cap_capable+684777/6a8de3>
Trace; c0106cbb <show_stack+af/b7>
Trace; c0106e3d <show_registers+15a/1bb>
Trace; c0106fc1 <die+8c/fd>
Trace; c0119039 <do_page_fault+3cc/570>
Trace; c0106925 <error_code+2d/38>
Trace; e0a05064 <__crc_dquot_drop+c92a0/762c1f>
Trace; c02c3290 <bus_match+3d/72>
Trace; c02c33b9 <driver_attach+54/92>
Trace; c02c3647 <bus_add_driver+8f/ae>
Trace; c02c3a7b <driver_register+31/33>
Trace; e0a05128 <__crc_dquot_drop+c9364/762c1f>
Trace; e0de4036 <__crc_dquot_drop+4a8272/762c1f>
Trace; c0132cf5 <sys_init_module+10a/249>
Trace; c0105ea9 <sysenter_past_esp+52/71>
Code; e0e663fa <__crc_dquot_drop+52a636/762c1f>
00000000 <_EIP>:
Code; e0e663fa <__crc_dquot_drop+52a636/762c1f> <=====
0: f6 40 04 20 testb $0x20,0x4(%eax) <=====
Code; e0e663fe <__crc_dquot_drop+52a63a/762c1f>
4: 0f 84 18 ff ff ff je ffffff22 <_EIP+0xffffff22>
Code; e0e66404 <__crc_dquot_drop+52a640/762c1f>
a: 8b 55 f0 mov 0xfffffff0(%ebp),%edx
Code; e0e66407 <__crc_dquot_drop+52a643/762c1f>
d: f6 82 8c 00 00 00 02 testb $0x2,0x8c(%edx)
1 warning issued. Results may not be reliable.
usb 1-1: new full speed USB device using address 2
usb%d: unregister usbnet usb-0000:00:1d.0-1, CDC Ethernet Device
unregister_netdevice: device usb%d/cdc24c00 never was registered
Unable to handle kernel paging request at virtual address 31206e79
printing eip:
e0e663fa
*pde = 00000000
Oops: 0000 [#1]
PREEMPT
Modules linked in: usbnet isofs zlib_inflate sg st sr_mod sd_mod scsi_mod ext3 jbd
nvidia parport_pc lp parport ipv6 snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss
snd_mixer_oss snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd_page_alloc gameport
snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore af_packet raw ide_floppy
ide_tape ide_cd cdrom ds yenta_socket pcmcia_core b44 mii ohci1394 ieee1394
nls_iso8859_1 ntfs intel_agp agpgart ehci_hcd uhci_hcd usbcore rtc
CPU: 0
EIP: 0060:[<e0e663fa>] Tainted: P
EFLAGS: 00010282 (2.6.7)
EIP is at usbnet_probe+0x2f2/0x3f0 [usbnet]
eax: 31206e75 ebx: c15c9400 ecx: 00000040 edx: cdbd2000
esi: e0e66db2 edi: cdc24c06 ebp: c4913ed8 esp: c4913ea0
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 6898, threadinfo=c4912000 task=c6a1d3b0)
Stack: c15c9400 c147f338 00000006 c0190229 c4685e30 cdbd2000 cdbd20cc ffffffb5
e0e66700 cd0c1120 cdc24c00 e0e69940 c147f338 ffffffed c4913ef4 e0a05064
c147f338 e0e66bc4 e0e69960 c147f348 ffffffed c4913f10 c02c3290 c147f348
Call Trace:
[<c0106cbb>] show_stack+0xaf/0xb7
[<c0106e3d>] show_registers+0x15a/0x1bb
[<c0106fc1>] die+0x8c/0xfd
[<c0119039>] do_page_fault+0x3cc/0x570
[<c0106925>] error_code+0x2d/0x38
[<e0a05064>] usb_probe_interface+0x56/0x67 [usbcore]
[<c02c3290>] bus_match+0x3d/0x72
[<c02c33b9>] driver_attach+0x54/0x92
[<c02c3647>] bus_add_driver+0x8f/0xae
[<c02c3a7b>] driver_register+0x31/0x33
[<e0a05128>] usb_register+0x40/0x92 [usbcore]
[<e0de4036>] usbnet_init+0x36/0x38 [usbnet]
[<c0132cf5>] sys_init_module+0x10a/0x249
[<c0105ea9>] sysenter_past_esp+0x52/0x71
Code: f6 40 04 20 0f 84 18 ff ff ff 8b 55 f0 f6 82 8c 00 00 00 02
