On Thu, 1 Jul 2004, Duncan Sands wrote: > > Hardware: > > Athlon XP 1600+ > > Epox 8KHA+ VIA KT266A > > BT878 TV-card (bttv card=36 tuner=1) > > Edimax Via6302 4port PCI Usb2 controller (ehci-hcd) > > Lacie P3 250GB Usb2 hard drive (usb-storage, reiserfs) > > I get hard hangs with a Bt878 + disk activity (every time it hangs, > the disk activity LED is on). But I don't have usb2. However I have > a similar processor, Athlon XP 2100+, and motherboard, VIA KT333. > I'm also using reiserfs (where an OOPS occurred in your system logs). > I also have a realtek 8139 ethernet card. We both have VIA usb 1.1 > controllers. My hangs happen with both 2.4 and 2.6 kernels. I only > get hangs if I'm using the bttv card.
Is it possible that you are exceeding the capacity of your PCI bus? > Are you sure you plugged your device into a usb 2 port, and not a usb 1.1 port? > Also, some products claim to be usb 2 devices, when they are in fact only usb 1.1. Be careful about your use of terms. Lots of people think USB-2.0 means the same as high speed and USB-1.1 means full speed. That's not right; it's perfectly legal for a USB-2.0 device to run only at full speed. Alan Stern ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
