Description of problem: Usb storage is unable to probe the usb bus.
Version-Release number of selected component (if applicable):
How reproducible: every time
Steps to Reproduce:lug in a freecom usb 2.0 hardisk in a intel i815
base syste
1. plug in a freecom usb 2.0 hardisk in a intel i815 base syste
2. 3.
Actual results:
usb storage not link to the system
Expected results: si should be able to munt the hardrive
Additional info: dmesg output
Linux version 2.6.7-1.459custom ([EMAIL PROTECTED]) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #2 Tue Jun 29 14:29:46 CEST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000017fc0000 (usable) BIOS-e820: 0000000017fc0000 - 0000000017ff8000 (ACPI data) BIOS-e820: 0000000017ff8000 - 0000000018000000 (ACPI NVS) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 383MB LOWMEM available. zapping low mappings. On node 0 totalpages: 98240 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 94144 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000ff980 ACPI: RSDT (v001 DELL ZUUL 0x20020611 MSFT 0x00001011) @ 0x17ff0000 ACPI: FADT (v001 DELL ZUUL 0x20020611 MSFT 0x00001011) @ 0x17ff1000 ACPI: BOOT (v001 DELL ZUUL 0x20020611 MSFT 0x00001011) @ 0x17ff4000 ACPI: DSDT (v001 D815EA EA81510A 0x00000013 MSFT 0x0100000b) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 Built 1 zonelists Kernel command line: ro root=/dev/hdb2 selinux=permissive single Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 797.520 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 384760k/392960k available (2617k kernel code, 7416k reserved, 657k data, 164k init, 0k highmem) Calibrating delay loop... 1576.96 BogoMIPS Security Scaffold v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Pentium III (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 111k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12) Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3 ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 3 (level, low) -> IRQ 3 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:0b.1[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 9 (level, low) -> IRQ 9 TC classifier action (bugs to [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> cc [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>) vesafb: probe of vesafb0 failed with error -6 Simple Boot Flag at 0x7a set to 0x1 Dell Dimension 4100 machine detected. Disabling APM. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled on user request. audit: initializing netlink socket (disabled) audit(1088519706.4294965655:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SGI XFS with ACLs, security attributes, large block numbers, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU1] (supports C1) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 0000:00:1f.1 ICH2: chipset revision 2 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 5T020H2, ATA DISK drive hdb: IC35L060AVER07-0, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive hdd: Pioneer DVD-ROM ATAPIModel DVD-105S 012, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39062500 sectors (20000 MB) w/2048KiB Cache, CHS=38752/16/63, UDMA(100) hda: hda1 hda2 hda3 < hda5 hda6 > hdb: max request size: 128KiB hdb: 120103200 sectors (61492 MB) w/1916KiB Cache, CHS=65535/16/63, UDMA(100) hdb: hdb1 hdb2 hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33) ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: Analog 3-axis 4-button joystick at pci0000:02:0c.1/gameport0 [TSC timer, 789 MHz clock, 888 ns res] gameport: pci0000:02:0c.1 speed 1125 kHz serio: i8042 AUX port at 0x60,0x64 irq 12 input: PS2++ Logitech Wheel Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). XFS mounting filesystem hdb2 Ending clean XFS mount for filesystem: hdb2 Freeing unused kernel memory: 164k freed ACPI: Power Button (FF) [PWRF] USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1f.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: irq 10, io base 0000ef80 uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.2: detected 2 ports usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: default language 0x0409 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.7-1.459custom uhci_hcd usb usb1: SerialNumber: 0000:00:1f.2 usb usb1: hotplug usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: hotplug hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 2ms hub 1-0:1.0: local power source is good uhci_hcd 0000:00:1f.2: port 1 portsc 0093 hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 usb 1-1: new full speed USB device using address 2 usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: default language 0x0409 usb 1-1: Product: FHD-Classic usb 1-1: Manufacturer: Freecom Technologies usb 1-1: SerialNumber: 100000000000000002927 usb 1-1: hotplug usb 1-1: adding 1-1:1.0 (config #1, interface 0) usb 1-1:1.0: hotplug SCSI subsystem initialized Initializing USB Mass Storage driver... usb-storage 1-1:1.0: usb_probe_interface usb-storage 1-1:1.0: usb_probe_interface - got id usb-storage: USB Mass Storage device detected usb-storage: altsetting is 0, id_index is 120 usb-storage: -- associate_dev device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> cdrom: open failed. usb 1-1: control timeout on ep0in uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000 [d73e0240] link (173e01e2) element (1680c100) 0: [d680c100] link (1680c140) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=173f77c0) 1: [d680c140] link (1680c180) e3 SPD Active Length=0 MaxLen=1 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=17f8e6a0) 2: [d680c180] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)
uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000 [d73e0270] link (173e01e2) element (1680c040) 0: [d680c040] link (1680c080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=173f77c0) 1: [d680c080] link (1680c0c0) e3 SPD Active Length=0 MaxLen=1 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=17f8e6a0) 2: [d680c0c0] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)
usb-storage: Transport: Bulk usb-storage: Protocol: Transparent SCSI usb-storage: Endpoints: In: 0xd68b0ab4 Out: 0xd68b0aa0 Int: 0x00000000 (Period 0) usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1 uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000 [d73e0240] link (173e01e2) element (1680c100) 0: [d680c100] link (1680c140) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=169c2020) 1: [d680c140] link (1680c180) e3 SPD Active Length=0 MaxLen=0 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=17474000) 2: [d680c180] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)
usb-storage: GetMaxLUN command result is -71, data is 0 usb-storage: storage_probe() failed usb-storage: -- usb_stor_release_resources usb-storage: -- dissociate_dev usb-storage: probe of 1-1:1.0 failed with error -1 usbcore: registered new driver usb-storage
USB Mass Storage support registered.
inserting floppy driver for 2.6.7-1.459custom Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev hdd, sector 950016 Adding 1020088k swap on /dev/hdb1. Priority:-1 extents:1 Adding 409616k swap on /dev/hda5. Priority:-2 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode.
00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02) 00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev 02) 00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 02) 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 02) 00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 02) 00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation NV15 [GeForce2 GTS/Pro] (rev a4) 02:0a.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30) 02:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07) 02:0c.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
