Hi Alan, here's the requested log, according to the last one, something changed but it wasn't fully succesful...
If you have more to test - tell me. Thanks for your work on that, I think in the future we will see more and more of these devices... TIA, Gerhard On Friday 23 July 2004 23:01, Alan Stern wrote: [SNIPSNAP] > > So where is the problem? Do you need some more information? > > I just posted an experimental patch for 2.6.7 in > > http://marc.theaimsgroup.com/?l=linux-usb-users&m=109061429001091&w=2 > > It should apply (with altered line numbers) to 2.6.8 also, although you > may have to remove the two lines that mention usb_endpoint_running() to > get it to build properly. Please try it out and post the USB debugging > output you get. >
Jul 24 13:46:36 laeppi kernel: uhci_hcd 0000:00:07.2: wakeup_hc Jul 24 13:46:36 laeppi kernel: uhci_hcd 0000:00:07.2: port 1 portsc 0083 Jul 24 13:46:36 laeppi kernel: hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s Jul 24 13:46:36 laeppi kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 Jul 24 13:46:37 laeppi kernel: usb 1-1: new full speed USB device using address 2 Jul 24 13:46:42 laeppi kernel: usb 1-1: control timeout on ep0in Jul 24 13:46:42 laeppi kernel: uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000 Jul 24 13:46:42 laeppi kernel: [ceb1b240] link (0eb1b1e2) element (0fafe040) Jul 24 13:46:42 laeppi kernel: 0: [cfafe040] link (0fafe080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=0fc221e0) Jul 24 13:46:42 laeppi kernel: 1: [cfafe080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000) Jul 24 13:46:42 laeppi kernel: Jul 24 13:46:42 laeppi kernel: uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000 Jul 24 13:46:42 laeppi kernel: [ceb1b240] link (0eb1b1e2) element (0fafe040) Jul 24 13:46:42 laeppi kernel: 0: [cfafe040] link (0fafe080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=0fc22bc0) Jul 24 13:46:42 laeppi kernel: 1: [cfafe080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000) Jul 24 13:46:42 laeppi kernel: Jul 24 13:46:42 laeppi kernel: usb 1-1: device not accepting address 2, error -71 Jul 24 13:46:42 laeppi kernel: usb 1-1: new full speed USB device using address 3 Jul 24 13:46:47 laeppi kernel: usb 1-1: control timeout on ep0in Jul 24 13:46:49 laeppi kernel: uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000 Jul 24 13:46:49 laeppi kernel: [ceb1b240] link (0eb1b1e2) element (0fafe080) Jul 24 13:46:49 laeppi kernel: Element != First TD Jul 24 13:46:49 laeppi kernel: 0: [cfafe040] link (0fafe080) e3 Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=0fc22bc0) Jul 24 13:46:49 laeppi kernel: 1: [cfafe080] link (0fafe0c0) e0 SPD Stalled CRC/Timeo Length=7ff MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=013b04a0) Jul 24 13:46:49 laeppi kernel: 2: [cfafe0c0] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000) Jul 24 13:46:49 laeppi kernel: Jul 24 13:46:50 laeppi kernel: uhci_hcd 0000:00:07.2: suspend_hc
