On Mon, Aug 02, 2004 at 07:58:35PM -0400, Spiros Papadimitriou wrote: > If I understand correctly, the INQUIRY response is filled in from the > strings which, in lsusb, correspond to the iManufacturer and iProduct > fields? These are set fine for all three devices.
That is not correct. The INQUIRY response is only filled in like that for
devices which do not support INQUIRY directly directly (i.e. sddr09, etc.).
Your devices do not fall into that category.
If they did fall into that category, they would get their strings from the
unusual device list entry for that device. None of the entries in that
table use the word 'generic'.
> Also, if I am guessing correctly, the sg_inq output (see followup email)
> indicates that it is the "if(data[0]&0x20)" in fill_inquiry_response()
> that is "responsible" for this.
>
> Any idea why this is happening for two out of three jumpdrives? All
> three jumpdrives light up fine and mount fine (if that means anything).
> What does "not connected" (comment in fill_inquiry_response()) mean in
> this context?
That's dead code which should be removed. It's a code path which is
impossible to hit.
Matt
--
Matthew Dharm Home: [EMAIL PROTECTED]
Maintainer, Linux USB Mass Storage Driver
I think the problem is there's a nut loose on your keyboard.
-- Greg to Customer
User Friendly, 1/5/1999
pgpfEejcawE0E.pgp
Description: PGP signature
