On Wed, 13 Oct 2004, Nuno Dias wrote: > Ok, this time the full usb-storage verbose debugging :) > > Connect the usb disk ... > ------- > ohci_hcd 0000:00:02.2: wakeup > ohci_hcd 0000:00:02.2: GetStatus roothub.portstatus [0] = 0x00010101 > CSC PPS CCShub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s > hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 > ohci_hcd 0000:00:02.2: GetStatus roothub.portstatus [0] = 0x00100103 > PRSC PPS PES CCS > usb 1-1: new full speed USB device using address 2 > usb 1-1: new device strings: Mfr=56, Product=78, SerialNumber=100 > usb 1-1: default language 0x0409 > usb 1-1: Product: USB2.0 Storage Device > usb 1-1: Manufacturer: Cypress Semiconductor > usb 1-1: SerialNumber: DEF10806C57E > usb 1-1: hotplug > usb 1-1: adding 1-1:1.0 (config #1, interface 0) > usb 1-1:1.0: hotplug > Initializing USB Mass Storage driver... > usb-storage 1-1:1.0: usb_probe_interface > usb-storage 1-1:1.0: usb_probe_interface - got id > scsi0 : SCSI emulation for USB Mass Storage devices > Vendor: IC35L020 Model: AVER07-0 Rev: 0 0 > Type: Direct-Access ANSI SCSI revision: 02 > SCSI device sda: 39102336 512-byte hdwr sectors (20020 MB) > sda: assuming drive cache: write through > sda: sda1 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 > USB Mass Storage device found at 2 > usbcore: registered new driver usb-storage > USB Mass Storage support registered. > Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 > updfstab: Using deprecated /dev/sg mechanism instead of SG_IO on the > actual device > ------- > > disconnect the usb disk ... > ------ > ohci_hcd 0000:00:02.2: GetStatus roothub.portstatus [0] = 0x00030100 > PESC CSC PPS > hub 1-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > usb 1-1: USB disconnect, address 2 > usb 1-1: usb_disable_device nuking all URBs > usb 1-1: unregistering interface 1-1:1.0 > usb 1-1:1.0: hotplug > usb 1-1: unregistering device > usb 1-1: hotplug > hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 > ohci_hcd 0000:00:02.2: suspend root hub > ---- > > When i plug the usb cable again, no messages are display in dmesg ... > > ND
I'm sorry to say that your log does _not_ include any usb-storage debugging messages. Either you didn't build the driver properly or else you didn't load the newly-built driver. Alan Stern ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
