hello, I want connect my digital camera (dimage a1)
with 2.4 kernel rmmod usb-storage sleep 2s insmod usb-storage
and i can connect the camera
but with 2.6.8 it doesn't work
my USB work an example with a USB key
/////////////////////////////////////
/////////////////////////////////////
hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
ehci_hcd 0000:00:0f.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 5-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
hub 5-0:1.0: port 1 not reset yet, waiting 50ms
ehci_hcd 0000:00:0f.2: port 1 high speed
ehci_hcd 0000:00:0f.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 5-1: new high speed USB device using address 10
usb 5-1: new device strings: Mfr=16, Product=32, SerialNumber=48
usb 5-1: default language 0x0409
usb 5-1: Product: USB 2.0 Mobile Disk
usb 5-1: Manufacturer: TTI-WDE
usb 5-1: SerialNumber: 0426034500283
usb 5-1: hotplug
usb 5-1: adding 5-1:1.0 (config #1, interface 0)
usb 5-1:1.0: hotplug
usb-storage 5-1:1.0: usb_probe_interface
usb-storage 5-1:1.0: usb_probe_interface - got id
scsi7 : SCSI emulation for USB Mass Storage devices
Vendor: USB 2.0 Model: Mobile Disk Rev:
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 253952 512-byte hdwr sectors (130 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi7, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi7, channel 0, id 0, lun 0, type 0
USB Mass Storage device found at 10
/////////////////////////////////////
/////////////////////////////////////
and this with the camera
/////////////////////////////////////
////////////////////////////////////
hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
ehci_hcd 0000:00:0f.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 5-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
hub 5-0:1.0: port 2 not reset yet, waiting 50ms
ehci_hcd 0000:00:0f.2: port 2 full speed --> companion
ehci_hcd 0000:00:0f.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
ohci_hcd 0000:00:0f.1: wakeup
ohci_hcd 0000:00:0f.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hub 4-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:0f.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
usb 4-1: new full speed USB device using address 4
usb 4-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: default language 0x0409
usb 4-1: Product: DIMAGE CAMERA
usb 4-1: Manufacturer: MINOLTA
usb 4-1: hotplug
usb 4-1: adding 4-1:1.0 (config #1, interface 0)
usb 4-1:1.0: hotplug
usb-storage 4-1:1.0: usb_probe_interface
usb-storage 4-1:1.0: usb_probe_interface - got id
ohci_hcd 0000:00:0f.1: urb cee24860 path 1 ep0in 5e0a0000 cc 5 --> status -110
usb-storage: probe of 4-1:1.0 failed with error -1
///////////////////////////////// /////////////////////////////////
any idea???
tks Bruno
------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
