Hi all! I have a unusual problem with psx joypad adaptor usb.... My HW are abit NF7-s 2.0 (nforce2), psx adapter + ps2joypad..., i use kernel 2.6.9, (but this problem is in 2.6.7) under gentoo and i have hotplug installed.
ok i start my pc and this is the modules load: midallbox root # lsmod Module Size Used by uhci_hcd 32780 0 ohci1394 34628 0 snd_intel8x0 35208 1 snd_ac97_codec 71940 1 snd_intel8x0 snd_pcm 98568 1 snd_intel8x0 snd_timer 26116 1 snd_pcm snd_page_alloc 11848 2 snd_intel8x0,snd_pcm snd_mpu401_uart 8128 1 snd_intel8x0 snd_rawmidi 25892 1 snd_mpu401_uart snd_seq_device 8840 1 snd_rawmidi snd 57700 9 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device soundcore 10336 1 snd ehci_hcd 43908 0 ohci_hcd 33860 0 nvidia_agp 7772 1 agpgart 34216 2 nvidia_agp evdev 9728 0 w83627hf 29188 0 eeprom 8200 0 i2c_sensor 4352 2 w83627hf,eeprom i2c_isa 2048 0 i2c_nforce2 6272 0 i2c_core 26896 5 w83627hf,eeprom,i2c_sensor,i2c_isa,i2c_nforce2 nvidia 4819540 12 sg 38688 0 Ok now moprobe usbhid joydev evdev, and after i connect the psx adapter: tail -f /var/log/messages Aug 23 17:57:13 midallbox kernel: ohci_hcd 0000:00:02.1: wakeup Aug 23 17:57:13 midallbox kernel: usb 2-3: new low speed USB device using address 2 Aug 23 17:57:13 midallbox kernel: usb 2-3: new low speed USB device using address 3 Nothing to do the usb adpter there isn't: lsusb Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Ok now start my usb printer Canon i475D with include a memory card reader for digital photo machine: tail -f /var/log/messages Aug 23 18:01:44 midallbox kernel: ohci_hcd 0000:00:02.1: wakeup Aug 23 18:01:44 midallbox kernel: usb 2-2: new full speed USB device using address 6 Aug 23 18:01:44 midallbox kernel: hub 2-2:1.0: USB hub found Aug 23 18:01:44 midallbox kernel: hub 2-2:1.0: 3 ports detected Aug 23 18:01:45 midallbox kernel: usb 2-2.1: new full speed USB device using address 7 Aug 23 18:01:45 midallbox kernel: usb 2-2.1: Product: i475D Aug 23 18:01:45 midallbox kernel: usb 2-2.1: Manufacturer: Canon Aug 23 18:01:45 midallbox kernel: usb 2-2.1: SerialNumber: 303QB3 Aug 23 18:01:45 midallbox kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x04A9 pid 0x108C Aug 23 18:01:45 midallbox kernel: usbcore: registered new driver usblp Aug 23 18:01:45 midallbox kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Aug 23 18:01:45 midallbox kernel: usb 2-2.2: new full speed USB device using address 8 Aug 23 18:01:45 midallbox kernel: usb 2-2.2: Product: i475D Storage Aug 23 18:01:45 midallbox kernel: usb 2-2.2: Manufacturer: Canon Aug 23 18:01:45 midallbox kernel: usb 2-2.2: SerialNumber: 333033514233 Aug 23 18:01:45 midallbox kernel: Initializing USB Mass Storage driver... Aug 23 18:01:45 midallbox kernel: scsi1 : SCSI emulation for USB Mass Storage devices Aug 23 18:01:45 midallbox kernel: Vendor: Canon Model: i475DStorage Rev: 0115 Aug 23 18:01:45 midallbox kernel: Type: Direct-Access ANSI SCSI revision: 02 Aug 23 18:01:45 midallbox kernel: Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 0 Aug 23 18:01:45 midallbox kernel: Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0 Aug 23 18:01:45 midallbox kernel: usbcore: registered new driver usb-storage Aug 23 18:01:45 midallbox kernel: USB Mass Storage support registered. Aug 23 18:01:45 midallbox kernel: usb 2-2.3: new full speed USB device using address 9 Aug 23 18:01:45 midallbox kernel: usb 2-2.3: Product: i475D HID Aug 23 18:01:45 midallbox kernel: usb 2-2.3: Manufacturer: Canon Aug 23 18:01:45 midallbox kernel: usb 2-2.3: SerialNumber: 303QB3 Aug 23 18:01:45 midallbox kernel: hiddev96: USB HID v1.10 Device [Canon i475D HID] on usb-0000:00:02.1-2.3 Aug 23 18:01:46 midallbox scsi.agent[7222]: disk at /devices/pci0000:00/0000:00:02.1/usb2/2-2/2-2.2/2-2.2:1.0/host1/1:0:0:0 ok now lsusb: lsusb Bus 003 Device 001: ID 0000:0000 Bus 002 Device 009: ID 04a9:1302 Canon, Inc. Bus 002 Device 008: ID 04a9:1038 Canon, Inc. Bus 002 Device 007: ID 04a9:108c Canon, Inc. Bus 002 Device 006: ID 04a9:1005 Canon, Inc. Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 and this is the status of modules: lsmod Module Size Used by usb_storage 92208 0 usblp 13056 0 usbhid 35264 0 uhci_hcd 32780 0 ohci1394 34628 0 snd_intel8x0 35208 1 snd_ac97_codec 71940 1 snd_intel8x0 snd_pcm 98568 1 snd_intel8x0 snd_timer 26116 1 snd_pcm snd_page_alloc 11848 2 snd_intel8x0,snd_pcm snd_mpu401_uart 8128 1 snd_intel8x0 snd_rawmidi 25892 1 snd_mpu401_uart snd_seq_device 8840 1 snd_rawmidi snd 57700 9 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device soundcore 10336 1 snd ehci_hcd 43908 0 ohci_hcd 33860 0 nvidia_agp 7772 1 agpgart 34216 2 nvidia_agp evdev 9728 0 w83627hf 29188 0 eeprom 8200 0 i2c_sensor 4352 2 w83627hf,eeprom i2c_isa 2048 0 i2c_nforce2 6272 0 i2c_core 26896 5 w83627hf,eeprom,i2c_sensor,i2c_isa,i2c_nforce2 nvidia 4819540 12 sg 38688 0 Ok now reconnect my psx adapter: tail -f /var/log/messages Aug 23 18:04:28 midallbox kernel: usb 2-3: new low speed USB device using address 10 Aug 23 18:04:28 midallbox kernel: usb 2-3: Product: USB Game Device Aug 23 18:04:28 midallbox kernel: drivers/usb/input/hid-core.c: ctrl urb status -32 received Aug 23 18:04:28 midallbox kernel: drivers/usb/input/hid-core.c: ctrl urb status -32 received Aug 23 18:04:28 midallbox kernel: input: USB HID v1.00 Joystick [04b4:c681] on usb-0000:00:02.1-3 Yhea my device lives!!! lsusb Bus 003 Device 001: ID 0000:0000 Bus 002 Device 010: ID 04b4:c681 Cypress Semiconductor Corp. Bus 002 Device 009: ID 04a9:1302 Canon, Inc. Bus 002 Device 008: ID 04a9:1038 Canon, Inc. Bus 002 Device 007: ID 04a9:108c Canon, Inc. Bus 002 Device 006: ID 04a9:1005 Canon, Inc. Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 and the modules are: lsmod Module Size Used by joydev 10176 0 usb_storage 92208 0 usblp 13056 0 usbhid 35264 0 uhci_hcd 32780 0 ohci1394 34628 0 snd_intel8x0 35208 1 snd_ac97_codec 71940 1 snd_intel8x0 snd_pcm 98568 1 snd_intel8x0 snd_timer 26116 1 snd_pcm snd_page_alloc 11848 2 snd_intel8x0,snd_pcm snd_mpu401_uart 8128 1 snd_intel8x0 snd_rawmidi 25892 1 snd_mpu401_uart snd_seq_device 8840 1 snd_rawmidi snd 57700 9 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device soundcore 10336 1 snd ehci_hcd 43908 0 ohci_hcd 33860 0 nvidia_agp 7772 1 agpgart 34216 2 nvidia_agp evdev 9728 0 w83627hf 29188 0 eeprom 8200 0 i2c_sensor 4352 2 w83627hf,eeprom i2c_isa 2048 0 i2c_nforce2 6272 0 i2c_core 26896 5 w83627hf,eeprom,i2c_sensor,i2c_isa,i2c_nforce2 nvidia 4819540 12 sg 38688 0 I ask you: where is the problem? in hotplug? is a bug for nforce2 motherboard? How do resolv this problem, i have found a bug? (under M$ WinXP all are ok) Please help me Thanks and sorry for my english Please help me ------------------------------------------------------- This SF.Net email is sponsored by: Sybase ASE Linux Express Edition - download now for FREE LinuxWorld Reader's Choice Award Winner for best database on Linux. http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
