Hi,
I am posting all relevant details below.
--------------------------------------------------------
relevant section of /proc/bus/usb/devices when memory stick was plugged in
--------------------------------------------------------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0ea0 ProdID=2168 Rev= 2.00
S: Manufacturer=USB
S: Product=Flash Disk
S: SerialNumber=61100741561A5B6B
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50
Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=125us
----------------------------------------------------------
relevant o/p of dmesg after just plugging in memory stick
----------------------------------------------------------
hub.c: new USB device 00:1d.7-1, assigned address 2
usb.c: USB device 2 (vend/prod 0xea0/0x2168) is not claimed by any
active driver.
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: JetFlash Model: TS512MJF2B Rev: 2.00
Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
--------------------------------------------------------------
o/p of dmesg after giving mount /dev/sda1 /mnt/usb command
--------------------------------------------------------------
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sense key Unit Attention
Additional sense indicates Not ready to ready change,medium may have
changed
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
SCSI device sda: 1024000 512-byte hdwr sectors (524 MB)
sda: Write Protect is off
sda: sda1 sda2 sda3 sda4
usb.c: USB disconnect on device 00:1d.7-1 address 2
hub.c: new USB device 00:1d.7-1, assigned address 3
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
memory : cdef2400
memory : cdef2600
memory : cdef2180
mtrr: base(0xf0020000) is not aligned on a size(0x300000) boundary
memory : cdef2700
memory : cdef2480
memory : cdef2780
memory : cdef2f00
memory : cdef2e00
PCI: Found IRQ 11 for device 00:02.0
PCI: Sharing IRQ 11 with 00:1d.0
usb.c: USB disconnect on device 00:1d.7-1 address 3
---------------------------------------------------------------------------------
The thing to note is that this drive is working properly on my Win2k
system. Also I had tried mounting some other USB meory sticks of my
friends (may be of different make but USB2.0 standard only) and they
worked properly.
Please help, getting my memory stick accessed in Linux is only of
crucial importance to me :(
TIA.
Medha
On Tue, 30 Nov 2004 15:59:41 -0500 (EST), Alan Stern
<[EMAIL PROTECTED]> wrote:
> On Wed, 1 Dec 2004, Medha Atre wrote:
>
> > No, problem is that I am NOT able to mount the device, and what I get
> > from linux-usb.org site, is that the id mentioned in error message in
> > not present in /usr/share/hwdata/usb.ids file.
> >
> > Please help.
> >
> > TIA.
> >
> > Medha
>
> Please post the contents of /proc/bus/usb/devices with the device plugged
> in. Also post the dmesg output showing the log entries for when you
> plugged in the device.
>
> Alan Stern
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
