Some more output. I'm sure the device is USB2 capable and plugged into a USB2 hub (search "USB 2.0"
I think there's a command to run or /proc entry to change to enable USB2 support on a device, I think I remember reading that in an external HD howto somewher but I can't find it now. --- > [EMAIL PROTECTED] # lspci > 00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and > Memory Controller Hub (rev 04) > 00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 04) > 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 11) > 00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 11) > 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 11) > 00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 11) > 00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 11) > 00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 11) > 00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 > Audio (rev 11) > 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 > MX/MX 400] (rev b2) > 02:09.0 SCSI storage controller: Adaptec AHA-2940/2940W / AIC-7871 > (rev 03) > 02:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ (rev 10) > 02:0b.0 USB Controller: NEC Corporation USB (rev 41) > 02:0b.1 USB Controller: NEC Corporation USB (rev 41) > 02:0b.2 USB Controller: NEC Corporation USB 2.0 (rev 02) > ^ device is plugged into this > > ---- > > kernel: > > Nov 30 20:19:08 [kernel] usb-storage: queuecommand called > - Last output repeated twice - > Nov 30 20:19:08 [kernel] usb-storage: *** thread awakened. > Nov 30 20:19:09 [kernel] usb-storage: queuecommand called > Nov 30 20:19:09 [kernel] usb-storage: *** thread awakened. > Nov 30 20:19:09 [kernel] usb-storage: queuecommand called > - Last output repeated twice - > Nov 30 20:19:09 [kernel] usb-storage: *** thread awakened. > Nov 30 20:19:09 [kernel] USB Mass Storage device found at 4 > Nov 30 20:19:09 [kernel] usb usb5: string descriptor 0 read error: > -19 > > > Quoting "Stephen J. Gowdy" <[EMAIL PROTECTED]>: > > > You are correct it is operating at USB1 speed. What is in you kerel > > logs > > when you plg it in? Whaat is the output of lspci -v? > > > > On Mon, 29 Nov 2004, jago25_98 wrote: > > > > > My external hard drive running via a USB-IDE apater seems to be > > > running very slow: > > > > > > --- > > > [EMAIL PROTECTED]/proc/bus/usb] # hdparm -Tt /dev/sde > > > > > > /dev/sde: > > > Timing cached reads: 168 MB in 2.01 seconds = 83.55 MB/sec > > > Timing buffered disk reads: 4 MB in 4.47 seconds = 916.88 > > kB/sec > > > [EMAIL PROTECTED]/proc/bus/usb] # > > > --- > > > > > > This leads me to belive it's using USB1 mode instead of usb2. > > I'm > > > fairly sure my PCI card is USB2 and it's plugged into that. > > Here's my > > > devices. Do I need to set something to enable USB2 bearing in > > mind I > > > also have USB1 adapters onboard my motherboard. I thought it was > > > automatic and so I'm writing to be sure of this. > > > > > > ? > > > > > > Thanks for any help however basic. > > > > > > --- > > > > > > [EMAIL PROTECTED]/proc/bus/usb] # cat /proc/bus/usb/devices > > > > > > T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= > > 5 > > > B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 > > > D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 > > > P: Vendor=0000 ProdID=0000 Rev= 2.06 > > > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 > > Driver=hub > > > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms > > > > > > T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= > > 2 > > > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > > > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > > P: Vendor=0000 ProdID=0000 Rev= 2.06 > > > S: Manufacturer=Linux 2.6.9-ac10 ohci_hcd > > > S: Product=NEC Corporation USB (#2) > > > S: SerialNumber=0000:02:0b.1 > > > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 > > Driver=hub > > > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > > > > > T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= > > 0 > > > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > > > P: Vendor=04cf ProdID=8818 Rev=a3.01 > > > S: Manufacturer=Myson Century, Inc. > > > S: Product=USB Mass Storage Device > > > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 10mA > > > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=05 Prot=50 > > > Driver=usb-storage > > > E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > > > > T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= > > 3 > > > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > > > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > > P: Vendor=0000 ProdID=0000 Rev= 2.06 > > > S: Manufacturer=Linux 2.6.9-ac10 ohci_hcd > > > S: Product=NEC Corporation USB > > > S: SerialNumber=0000:02:0b.0 > > > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 > > Driver=hub > > > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > > > > > T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= > > 0 > > > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > > > P: Vendor=0dda ProdID=2005 Rev= 1.3a > > > S: Manufacturer=ICSI > > > S: Product=2.0 Card Reader > > > S: SerialNumber=ABCD1234 > > > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA > > > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 > > > Driver=usb-storage > > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > > > > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= > > 2 > > > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > > > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > > P: Vendor=0000 ProdID=0000 Rev= 2.06 > > > S: Manufacturer=Linux 2.6.9-ac10 uhci_hcd > > > S: Product=Intel Corp. 82801BA/BAM USB (Hub #2) > > > S: SerialNumber=0000:00:1f.4 > > > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 > > Driver=hub > > > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > > > > > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= > > 2 > > > B: Alloc=342/900 us (38%), #Int= 5, #Iso= 2 > > > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > > P: Vendor=0000 ProdID=0000 Rev= 2.06 > > > S: Manufacturer=Linux 2.6.9-ac10 uhci_hcd > > > S: Product=Intel Corp. 82801BA/BAM USB (Hub #1) > > > S: SerialNumber=0000:00:1f.2 > > > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 > > Driver=hub > > > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > > > > > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= > > 0 > > > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > > P: Vendor=046d ProdID=c025 Rev=98.02 > > > S: Manufacturer=B16_b_02 > > > S: Product=USB-PS/2 Optical Mouse > > > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 > > Driver=usbhid > > > E: Ad=81(I) Atr=03(Int.) MxPS= 5 Ivl=10ms > > > > > > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= > > 4 > > > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > > P: Vendor=0451 ProdID=1446 Rev= 1.10 > > > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 > > Driver=hub > > > E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms > > > > > > T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 4 Spd=1.5 MxCh= > > 0 > > > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > > P: Vendor=045e ProdID=001d Rev= 1.11 > > > S: Product=Microsoft Natural Keyboard Pro > > > C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 > > Driver=usbhid > > > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms > > > I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 > > Driver=usbhid > > > E: Ad=82(I) Atr=03(Int.) MxPS= 3 Ivl=10ms > > > > > > T: Bus=01 Lev=02 Prnt=03 Port=02 Cnt=02 Dev#= 5 Spd=12 MxCh= > > 0 > > > D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > > > P: Vendor=0a12 ProdID=0001 Rev= 5.25 > > > C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr= 0mA > > > I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 > > Driver=hci_usb > > > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > > > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 > > Driver=hci_usb > > > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > > > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > > > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 > > Driver=hci_usb > > > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > > > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > > > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 > > Driver=hci_usb > > > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > > > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > > > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 > > Driver=hci_usb > > > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > > > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > > > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 > > Driver=hci_usb > > > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > > > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > > > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 > > Driver=hci_usb > > > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > > > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > > > I: If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 > > Driver=(none) > > > [EMAIL PROTECTED]/proc/bus/usb] # cat /proc/bus/usb/devices > > > > > > ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
