>>>>> Regarding 'Re: problem: NEC chipset USB2 PCI card and Linux 2.4.27';
>>>>> Stephen J. Gowdy adds:
>> Sounds like there might be an IRQ problem. Can you move the card to
>> a different PCI slot?
I wrote yesterday:
> I am going to try that tomorrow. (I will post the result!)
Oh yes, now it works! Thank you very much!
So the problem was:
- I had to load the usb-ohci driver then the ehci-hcd modules;
- I had to put the card into another PCI slot.
Now it works perfectly.
Thank you again. :)
--
...sutongi tti olleh
[0] /join #real_life
Cannot join #real_life (invite only)
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
