The cable from your motherboard to the case front is probably the problem. On Thu, 6 Jan 2005, Paul LeoNerd Evans wrote:
> On Thu, 6 Jan 2005 15:09:34 -0800 (PST) > "Stephen J. Gowdy" <[EMAIL PROTECTED]> wrote: > > > If that is the case you could have a cable not rated for USB2 speeds > > somewhere. > > Well, the cable is a standard A-to-miniB cable, the one that came with the > device. It's plugged in directly to the machine on the case-front USB2 > port. > > I also have an iRiver music player device that works just fine at USB2 > speed using the very same cable, in the same port. > > Just for reference, the exact message captured from dmesg is the > following; the delay between each line is about 1 second. > > ----- > > usb 1-6: new high speed USB device using address 2 > usb 1-6: device descriptor read/8, error -71 > usb 1-6: new high speed USB device using address 3 > usb 1-6: device descriptor read/8, error -71 > usb 1-6: new high speed USB device using address 4 > usb 1-6: device not accepting address 4, error -71 > usb 1-6: new high speed USB device using address 5 > usb 1-6: device not accepting address 5, error -71 > usb 1-6: new high speed USB device using address 6 > usb 1-6: device not accepting address 6, error -71 > usb 1-6: new high speed USB device using address 7 > usb 1-6: device not accepting address 7, error -71 > usb 1-6: new high speed USB device using address 8 > usb 1-6: device not accepting address 8, error -71 > usb 1-6: new high speed USB device using address 9 > usb 1-6: device descriptor read/8, error -71 > usb 1-6: new high speed USB device using address 10 > usb 1-6: device not accepting address 10, error -71 > > > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
