On Sun, 9 Jan 2005, Eero Heino wrote: > > You can try using the "old_scheme_first=y" module parameter for the > > usbcore module. I don't know that it will help, but maybe it will... > > > > Alan Stern > > > > I loaded usbcore with the "old_scheme_first=y" parameter > and when I connect the adapter I get > > kernel: usb 1-2: Product: USB 10M HomePNA Adapter > kernel: usb 1-2: Manufacturer: Generic > kernel: usb 1-2: SerialNumber: 00E0989BC8B3 > kernel: drivers/usb/net/kaweth.c: Downloading firmware... > usb.agent[4344]: kaweth: already loaded > kernel: drivers/usb/net/kaweth.c: Firmware loaded. I'll be back... > kernel: kaweth: probe of 1-2:1.0 failed with error -5 > kernel: usb 1-2: USB disconnect, address 6 > kernel: usb 1-2: new full speed USB device using ohci_hcd and address 7 > usb 1-2: device descriptor read/8, error -71 > usb 1-2: device descriptor read/8, error -71 > kernel: usb 1-2: new full speed USB device using ohci_hcd and address 8 > usb 1-2: device descriptor read/8, error -71 > usb 1-2: device descriptor read/8, error -71
Then I'm fresh out of ideas. Alan Stern ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
