I have a device (below) that only gets properly attached if I modprobe -r ehci_hcd. I just upgraded to the 2.6.10-3 kernel in debian, because I was hoping the problem would be resolved.
Is there some way I can force this device to use ohci_hcd without having to remove ehci_hcd? Thanks for any suggestions, Chris T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0d7d ProdID=1300 Rev= 0.50 S: Manufacturer= S: Product=USBDrive2.0 S: SerialNumber=4B3819000941 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
