On Thu, 3 Feb 2005 11:30:35 -0500 (EST) Alan Stern <[EMAIL PROTECTED]> wrote:
> On Thu, 3 Feb 2005, Chris Donovan wrote: > > > I am not sure if this is the most approriate place to be posting > > this > > but I found a few simliar posts from Alan Stern > > (http://marc.theaimsgroup.com/?l=linux-usb-users&m=110011917429312&; > > w=2) about this same issue. I just thought perhaps somebody would > > want to know. I have a Panasonic DMC-FZ1 camera (2 years old or so > > now), and for some reason it used to work pre 2.6 and I haven't used > > it much since going to 2.6 but I now ran into the problem that the > > device wasn't listed in device_info, but yet was recognized and > > everything so I did exactly as Alan Stern said in the before > > mentioned post but using my camera's info. > > > > # echo 'MATSHITA:DMC-FZ1:0x80400' >>/proc/scsi/device_info > > # cat /proc/scsi/device_info|grep -i fz > > 'MATSHITA' 'DMC-FZ1 ' 0x80400 > > > > I can provide more detail if anyone wants it as well. I am not sure > > where the 0x80400 came from but it seems to work with my camera just > > fine. This setting wouldn't ruin anything would it? I sure hope > > not. > > The setting won't ruin anything. And when the 2.6.11 kernel is > released it might not even need that setting. To be sure about this, > I'll need to see the contents of your /proc/bus/usb/devices file with > the camera plugged in. > > Alan Stern The contents of /proc/bus/usb/devices are: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.10-1.12_FC2 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:07.2 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04da ProdID=2372 Rev= 0.10 S: Manufacturer=Panasonic S: Product=DMC-FZ1 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 0 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=255ms Thanks for your help, Chris- ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
