I have two USB flash drives - one is working fine, however the second (Alcor flash drive 058f:9382) does not get a /dev/sdX1 file created when it is inserted. I'm not sure how to troubleshoot this further, particularly since the ID above appears to be supported based on the ID list at http://www.linux-usb.org/usb.ids. (I presume this list applies to my kernel, which is quite a recent fc3 update. Is there a way for me to check what IDs my kernel supports?)
What is likely to be going wrong if no device file is being created on insertion of the drive? I'm running Fedora Core 3 with kernel 2.6.10-1.760_FC3smp. Dumps of syslog, /proc/bus/usb/devices are shown below. Thanks, Jason. ------------ syslog ------------- Feb 5 16:38:48 talby kernel: usb 4-1: new full speed USB device using uhci_hcd and address 2 Feb 5 16:38:48 talby kernel: scsi1 : SCSI emulation for USB Mass Storage devices Feb 5 16:38:53 talby kernel: Vendor: Generic Model: USB Flash Disk Rev: 7.78 Feb 5 16:38:53 talby kernel: Type: Direct-Access ANSI SCSI revision: 02 Feb 5 16:38:53 talby kernel: Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 0 Feb 5 16:38:53 talby scsi.agent[6658]: disk at /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/host1/target1:0:0/1:0:0:0 -------------- extract from devices ---------------- T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=058f ProdID=9382 Rev= 1.00 S: Manufacturer=ALCOR S: Product=Mass Storage Device C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb- storage E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
