Hello Everybody,
I have been trying to get the Powerlinc X10 usb device to work and have run into some problems. It seems I am having problems with device recognition. After pluggin in the device I do not see it through either lsusb or cat /proc/bus/usb/device. When I plug the device in I see the following through dmesg:
usb 2-1: new low speed USB device using ohci_hcd and address 16
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
ohci_hcd 0000:00:02.0: urb ffff8100301ad580 path 1 ep0in 5ed60000 cc 5 --> status -110
usb 2-1: unable to read config index 0 descriptor/all
usb 2-1: can't read configurations, error -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00120303 PRSC PESC LSDA PPS PES CCS
usb 2-1: new low speed USB device using ohci_hcd and address 17
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00120303 PRSC PESC LSDA PPS PES CCS
ohci_hcd 0000:00:02.0: urb ffff8100301ad580 path 1 ep0in 5ed60000 cc 5 --> status -110
usb 2-1: unable to read config index 0 descriptor/start
usb 2-1: can't read configurations, error -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00120303 PRSC PESC LSDA PPS PES CCS
usb 2-1: new low speed USB device using ohci_hcd and address 18
ohci_hcd 0000:00:02.0: urb ffff8100301ad580 path 1 ep0in 5ed60000 cc 5 --> status -110
usb 2-1: unable to read config index 0 descriptor/start
usb 2-1: can't read configurations, error -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00120303 PRSC PESC LSDA PPS PES CCS
usb 2-1: new low speed USB device using ohci_hcd and address 19
ohci_hcd 0000:00:02.0: urb ffff8100301ad580 path 1 ep0in 5ed60000 cc 5 --> status -110
usb 2-1: unable to read config index 0 descriptor/start
usb 2-1: can't read configurations, error -110
hub 2-0:1.0: state 5 ports 4 chg 0000 evt 0002
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00020301 PESC LSDA PPS CCS
hub 2-0:1.0: port 1 enable change, status 00000301
Any ideas on what might be going wrong?
I am using the 2.6.11 kernel on an AMD64 machine with the drivers from project WISH (http://wish.sourceforge.net/index2.html).
Thanks Faraz
------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Linux-usb-users@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
