I had hoped that one can figure things out from /proc and /sys. SHould'n
there be a way to do this? And no, trial and error is not really an
option. The devices in question are WCDMA/UMTS mobile data cards. They
will differ only by the SIM card inserted by the user. The ICCID of the
SIM is unknown during development and I would like to avoid to many
configuration files.
Regards
Joerg
--- Alan Stern <[EMAIL PROTECTED]> wrote:
> On Fri, 15 Apr 2005, Joerg Pommnitz wrote:
>
> > Hello all,
> > I have a question that I could not figure out from other sources. I
> have
> > the following hardware: an integrated CardBus USB host adapter with a
> > connected USB serial device with three interfaces (normally
> > ttyUSB0...ttyUSB2). Now I want to use 3 of these devices (remember:
> they
> > are integrated, so I can't just plug the USB device onto the same host
> > adapter). I know device A is in CardBus slot 1, device B is in CardBus
> > slot 2 and so on.
> >
> > Now the question: How do I figure out which ttyUSBx belongs to which
> > device?
>
> You can look in the system log. If you want, you can actually control
> which goes where by creating a udev configuration file.
>
> Alan Stern
>
>
___________________________________________________________
Gesendet von Yahoo! Mail - Jetzt mit 250MB Speicher kostenlos - Hier anmelden:
http://mail.yahoo.de
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
