Stephen,
I'll give that a try. I had read about noacpi (sp?) in other locations, but I'm not sure of the impact of doing that. What would I lose, if anything, by turning it off? If it's related to controlling the power of devices, would that extend to systems using a battery-backup system?
Will give it a try and post results, including my MB model, etc., in case it helps others.
Steve
On 6/21/05, Stephen J. Gowdy <[EMAIL PROTECTED]> wrote:
Try the FAQ suggestions for "device not accepting address".
On Tue, 21 Jun 2005, Steve Listopad wrote:
> All,
>
> Picked up an SD Card reader/writer to use, to transfer digital camera
> pictures to my FC3 box, instead of using the s l o w dock that came with the
> camera.
>
> Plugging the little bugger in throws lots of errors. Not sure where to begin
> diagnosing the problem, but I am assuming that the thing SHOULD work, and
> that it has to be some type of setup issue (I hope).
>
> Other notes: I am assuming that I don't have to 'format' the thing, since it
> already has pictures on it; is that a bad assumption? At any rate, I haven't
> gotten the system to recognize the thing, so haven't been able to mount it,
> etc. My system is fully updated (with the repositories that are active on a
> fresh install of FC3, no additional repositories used, yet).
>
> Suggestions?
>
> Steve
>
> ===============================================
> Relevant Info:
>
> Product: SanDisk Model SDDR-103 Mobile Card Reader / Writer
>
> Card: 512 MB SD Card
>
> Modules:
>
> [EMAIL PROTECTED] ~]# lsmod|grep usb
> usb_storage 79497 0
> scsi_mod 167697 5 usb_storage,sbp2,libata,3w_9xxx,sd_mod
>
> Kernel:
>
> [EMAIL PROTECTED] ~]# uname -a
> Linux localhost 2.6.11-1.27_FC3 #1 Tue May 17 20:24:57 EDT 2005 x86_64
> x86_64 x86_64 GNU/Linux
>
> tail -f of /var/log/messages when inserting device into usb port:
>
> Jun 16 22:36:40 localhost kernel: usb 1-3: new high speed USB device using
> ehci_hcd and address 39
> Jun 16 22:36:45 localhost kernel: usb 1-3: khubd timed out on ep0out
> Jun 16 22:36:50 localhost kernel: usb 1-3: khubd timed out on ep0out
> Jun 16 22:36:50 localhost kernel: usb 1-3: device not accepting address 39,
> error -110
> Jun 16 22:36:50 localhost kernel: usb 1-3: new high speed USB device using
> ehci_hcd and address 40
> Jun 16 22:36:55 localhost kernel: usb 1-3: khubd timed out on ep0in
> Jun 16 22:36:55 localhost kernel: usb 1-3: device descriptor read/8, error
> -110
> Jun 16 22:37:00 localhost kernel: usb 1-3: khubd timed out on ep0in
> Jun 16 22:37:00 localhost kernel: usb 1-3: device descriptor read/all, error
> -110
> Jun 16 22:37:00 localhost kernel: usb 1-3: new high speed USB device using
> ehci_hcd and address 41
> Jun 16 22:37:01 localhost kernel: usb 1-3: new high speed USB device using
> ehci_hcd and address 42
> Jun 16 22:37:06 localhost kernel: usb 1-3: khubd timed out on ep0in
> Jun 16 22:37:06 localhost kernel: usb 1-3: device descriptor read/all, error
> -110
> Jun 16 22:37:06 localhost kernel: usb 1-3: new high speed USB device using
> ehci_hcd and address 43
> Jun 16 22:37:11 localhost kernel: usb 1-3: khubd timed out on ep0out
> Jun 16 22:37:16 localhost kernel: usb 1-3: khubd timed out on ep0out
> Jun 16 22:37:16 localhost kernel: usb 1-3: device not accepting address 43,
> error -110
> Jun 16 22:37:16 localhost kernel: usb 1-3: new high speed USB device using
> ehci_hcd and address 44
> Jun 16 22:37:17 localhost kernel: usb 1-3: new high speed USB device using
> ehci_hcd and address 45
> Jun 16 22:37:22 localhost kernel: usb 1-3: khubd timed out on ep0out
> Jun 16 22:37:27 localhost kernel: usb 1-3: khubd timed out on ep0in
> Jun 16 22:37:27 localhost kernel: usb 1-3: device descriptor read/all, error
> -110
> Jun 16 22:37:27 localhost kernel: usb 1-3: new high speed USB device using
> ehci_hcd and address 46
> Jun 16 22:37:32 localhost kernel: usb 1-3: khubd timed out on ep0in
> Jun 16 22:37:32 localhost kernel: usb 1-3: device descriptor read/all, error
> -110
> Jun 16 22:37:32 localhost kernel: usb 1-3: new high speed USB device using
> ehci_hcd and address 47
> Jun 16 22:37:33 localhost kernel: usb 1-3: khubd timed out on ep0in
> Jun 16 22:37:35 localhost last message repeated 2 times
> Jun 16 22:37:35 localhost kernel: usb 1-3: device descriptor read/64, error
> -110
> Jun 16 22:37:40 localhost kernel: usb 1-3: khubd timed out on ep0in
> Jun 16 22:37:50 localhost last message repeated 2 times
> Jun 16 22:37:50 localhost kernel: usb 1-3: device descriptor read/64, error
> -110
> Jun 16 22:37:50 localhost kernel: usb 1-3: new high speed USB device using
> ehci_hcd and address 48
> Jun 16 22:37:51 localhost kernel: usb 1-3: khubd timed out on ep0in
> Jun 16 22:37:53 localhost last message repeated 2 times
> Jun 16 22:37:53 localhost kernel: usb 1-3: device descriptor read/64, error
> -110
> Jun 16 22:37:58 localhost kernel: usb 1-3: khubd timed out on ep0in
> Jun 16 22:38:08 localhost last message repeated 2 times
> Jun 16 22:38:09 localhost kernel: usb 1-3: device descriptor read/64, error
> -110
>
--
/------------------------------------+-------------------------\
|Stephen J. Gowdy | SLAC, MailStop 34, |
|http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, |
|http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA |
|EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 |
\------------------------------------+-------------------------/
--
steve
[EMAIL PROTECTED]
