G'day Guys,

I'm hoping that you may be able to help or point me in the right direction regarding my [Iomega Super DVD 16-+ R RW] under Linux FC4.

Ok here is a bit of history with my laptops PCMCIA Card Bus and the Belkin PCMCIA USB2 2 port card while running under windows: (www.everythingusb.com/forums/showthread.php?threadid=6296)

The short of it was until I had downloaded the latest ENE Technology Inc CB-710/2/4 Cardbus Controller WindowXP Drivers (list.driverguide.com/list/company2152/). I was only able to read from the DVDs / cds / usb sticks at USB 1.1 speeds.

When I got the new driver I was then able to access devices at full USB2 Speeds and be able to write dvds / usb sticks.

Well it looks like I'm back in the same square one for linux :(. When I attempt to burn data using k3b my dvd drive just sits there spinning but doing nothing just like last time.

Looking at one of KDE hardware viewer I can see the PCMCIA carbus is using a "yenta_socket" and the .

Could anyone tell me if there is a new / different driver that I can install that will resolve my problem :) ?

Many Thanks
Mark


*Here is info about my pc: *

[*Kernel Version:*]

2.6.11-1.1369_FC4.stk16, just updated to this version today to allow my softmodem drivers to work. But even with the original kernel, I still could not burn via the USB2.

[*Output from lspic:*]:

00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] (re
v 02)
00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M]
00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:03.0 Modem: ALi Corporation M5457 AC'97 Modem Controller
00:04.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controlle
r Audio Device (rev 02)
00:06.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
00:0a.0 CardBus bridge: ENE Technology Inc CB-710/2/4 Cardbus Controller (rev 01
)
00:0b.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev
01)
00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Contro
ller (PHY/Link)
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139
C+ (rev 10)
00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 330M/340M/350
M
02:00.0 USB Controller: NEC Corporation USB (rev 43)
02:00.1 USB Controller: NEC Corporation USB (rev 43)
02:00.2 USB Controller: NEC Corporation USB 2.0 (rev 04)


<*Clipping from "/proc/bus/usb/devices"* >

T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=059b ProdID=0251 Rev= 0.01
S: Manufacturer=Iomega
S: Product=Optical USB 2.0 Drive
S: SerialNumber=DEF10909BF51
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms




-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to