Hi, Everything seems to go well and the device is recognized by the kernel. The two devices (sda, sda1) are created and I can read the contents of the device. But, when I unplugged it the system hangs. It also hangs when I leave the device on the port for a couple of minutes.
Does anybody know why this is happening? BTW, this is a USB2.o device This is the message from dmesg: scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning Vendor: SanDisk Model: Cruzer Mini Rev: 0.4 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 2001888 512-byte hdwr sectors (1025 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 00 sda: assuming drive cache: write through SCSI device sda: 2001888 512-byte hdwr sectors (1025 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 00 sda: assuming drive cache: write through sda: sda1 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Thank you Vasilis ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
