Hello,
I recently bought a Sony DSC-W5 camera (very nice camera, btw). It
somehow refuses to talk to my computer. It was supposed to work like
a standard USB mass storage device - but it doesn't.
[EMAIL PROTECTED]:~# mount /dev/sda mnt/
mount: /dev/sda is not a valid block device
and that's it. Works fine for other storage devices. Yes, the camera
is on, in 'normal' access mode. I've even tested the cable.
I'm running linux 2.4.30 from kernel.org. I compiled usb-storage with
debug messages so that I have a lot of output to show. I'd prefer not
to upgrade to 2.6, as my laptop makes a screetching sound with it.
Thanks in advance for your help!
Regards,
Mario
This is the contents of /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=bf80
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=054c ProdID=0010 Rev= 5.00
S: Manufacturer=Sony
S: Product=Sony DSC
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=ff Prot=01 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
this is the dmesg output
hub.c: new USB device 00:1d.0-1, assigned address 2
emi26_probe start<7>usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 25
usb-storage: Array length appears to be: 96
usb-storage: Vendor: Sony
usb-storage: Product: DSC-S30/S70/S75/505V/F505/F707/F717/P8
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xe4ea72f4 Out: 0xe4ea72e0 Int: 0xe4ea7308
(Period 255)
usb-storage: New GUID 054c00100000000000000000
usb-storage: Transport: Control/Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: *** thread sleeping.
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 e3 e4 67 f7 1a c0
usb-storage: Invoking Mode Translation
usb-storage: command_abort() called
usb-storage: Call to usb_stor_control_msg() returned -104
usb-storage: -- transport indicates command was aborted
usb-storage: scsi command aborted
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 e3 e4 67 f7 1a c0
usb-storage: Invoking Mode Translation
usb-storage: command_abort() called
usb-storage: Call to usb_stor_control_msg() returned -104
usb-storage: -- transport indicates command was aborted
usb-storage: scsi command aborted
usb-storage: *** thread sleeping.
usb-storage: device_reset() called
usb-storage: CB_reset() called
usb-storage: CB[I] soft reset failed -32
usb-storage: bus_reset() called
usb-storage: bus_reset() complete
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 e3 e4 67 f7 1a c0
usb-storage: Invoking Mode Translation
usb-storage: command_abort() called
usb-storage: Call to usb_stor_control_msg() returned -104
usb-storage: -- transport indicates command was aborted
usb-storage: scsi command aborted
usb-storage: *** thread sleeping.
scsi: device set offline - not ready or command retry failed after bus
reset: host 1 channel 0 id 0 lun 0
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7/0)
usb-storage: *** thread sleeping.
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
