It looks like you should use the uhci and ehci drivers. YOu don't need
ohci. However, people do have more problems with VIA chipset, I'm assuming
that is the new card. What is in /proc/interrupts when you plug in a
device to it? Everything looks okay otherwise. I see you have stuff
plugged into it.
On Sat, 22 Oct 2005, Travis H. wrote:
> Here's requested info:
>
> # lsusb -v
>
> T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.13-rc6-3124-smp uhci_hcd
> S: Product=UHCI Host Controller
> S: SerialNumber=0000:02:06.1
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 4
> D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=0409 ProdID=0058 Rev= 1.00
> S: Manufacturer=NEC Corporation
> S: Product=USB2.0 Hub Controller
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
>
> T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc=106/900 us (12%), #Int= 1, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.13-rc6-3124-smp uhci_hcd
> S: Product=UHCI Host Controller
> S: SerialNumber=0000:02:06.0
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=051d ProdID=0002 Rev= 1.06
> S: Manufacturer=American Power Conversion
> S: Product=Back-UPS RS 1000 FW:7.g8 .D USB FW:g8
> S: SerialNumber=JB0445024349
> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 24mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
> E: Ad=81(I) Atr=03(Int.) MxPS= 6 Ivl=10ms
>
> T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.13-rc6-3124-smp uhci_hcd
> S: Product=UHCI Host Controller
> S: SerialNumber=0000:00:07.2
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
> D: Ver= 1.01 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1
> P: Vendor=0545 ProdID=8002 Rev= 3.0a
> S: Product=USB IMAGING DEVICE
> C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=ibmcam
> E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 0 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=ibmcam
> E: Ad=81(I) Atr=01(Isoc) MxPS=1022 Ivl=1ms
> I: If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=82(I) Atr=02(Bulk) MxPS= 0 Ivl=0ms
> I: If#= 1 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=82(I) Atr=02(Bulk) MxPS=1022 Ivl=0ms
>
> relevant USB PCI devices from "lspci -v":
>
> 00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
> (prog-if 00 [UHCI])
> Flags: bus master, medium devsel, latency 64, IRQ 19
> I/O ports at dce0 [size=32]
>
> 02:06.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 61) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> Flags: bus master, medium devsel, latency 64, IRQ 18
> I/O ports at ece0 [size=32]
> Capabilities: [80] Power Management version 2
>
> 02:06.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 61) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> Flags: bus master, medium devsel, latency 64, IRQ 19
> I/O ports at ecc0 [size=32]
> Capabilities: [80] Power Management version 2
>
> 02:06.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63)
> (prog-if 20 [EHCI])
> Subsystem: VIA Technologies, Inc. USB 2.0
> Flags: medium devsel, IRQ 16
> Memory at fafffc00 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
>
> Here's the relevant lines from modprobe.conf
>
> alias usb-controller uhci-hcd
> alias char-major-188-* usbserial
> alias usbdevfs usbcore
> install usbmouse /sbin/modprobe --first-time --ignore-install usbmouse
> && { /sbin/modprobe hid; /bin/true; }
> remove usbmouse { /sbin/modprobe -r hid; } ; /sbin/modprobe -r
> --first-time --ignore-remove usbmouse
> alias usb-uhci uhci-hcd
> alias usb-ohci ohci-hcd
> alias uhci uhci-hcd
> alias usb-controller1 ohci-hcd
> --
> http://www.lightconsulting.com/~travis/ -><-
> "We already have enough fast, insecure systems." -- Schneier & Ferguson
> GPG fingerprint: 50A1 15C5 A9DE 23B9 ED98 C93E 38E9 204A 94C2 641B
>
--
/------------------------------------+-------------------------\
|Stephen J. Gowdy | SLAC, MailStop 34, |
|http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, |
|http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA |
|EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 |
\------------------------------------+-------------------------/
-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc.
Get Certified Today * Register for a JBoss Training Course
Free Certification Exam for All Training Attendees Through End of 2005
Visit http://www.jboss.com/services/certification for more information
_______________________________________________
Linux-usb-users@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
