On Fri, 25 Nov 2005, Emmanuel PIERRE wrote: > Hi Alan, > > Is my error report correct ? can I do something to help ? > > Emmanuel > > On 11/23/05, Emmanuel PIERRE <[EMAIL PROTECTED]> wrote: > > here is a bit of the log: > > - plug the device > > - wait for detection > > - mount it > > - list it > > > > Nov 23 21:45:20 nef kernel: usb 5-1: reset high speed USB device using > > ehci_hcd and address 3 > > Nov 23 21:45:20 nef kernel: sd 1:0:0:0: SCSI error: return code = 0x70000 > > Nov 23 21:45:20 nef kernel: end_request: I/O error, dev sda, sector 22888863 > > Nov 23 21:45:20 nef kernel: end_request: I/O error, dev sda, sector 22888864 > > > > > > > > usb 5-1: default language 0x0409 > > usb 5-1: new device strings: Mfr=1, Product=2, SerialNumber=3 > > usb 5-1: Product: Mass Storage Device > > usb 5-1: Manufacturer: Prolific Technology Inc. > > usb 5-1: SerialNumber: 0 > > usb 5-1: hotplug > > usb 5-1: adding 5-1:1.0 (config #1, interface 0) > > usb 5-1:1.0: hotplug > > usb-storage 5-1:1.0: usb_probe_interface > > usb-storage 5-1:1.0: usb_probe_interface - got id > > usb-storage: USB Mass Storage device detected > > usb-storage: -- associate_dev > > usb-storage: Vendor: 0x067b, Product: 0x3507, Revision: 0x0100 > > usb-storage: Interface Subclass: 0x06, Protocol: 0x50 > > usb-storage: Transport: Bulk > > usb-storage: Protocol: Transparent SCSI > > usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1 > > usb-storage: GetMaxLUN command result is 1, data is 0 > > scsi1 : SCSI emulation for USB Mass Storage devices > > usb-storage: *** thread sleeping. > > usb-storage: device found at 3 > > usb-storage: waiting for device to settle before scanning > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Command INQUIRY (6 bytes) > > usb-storage: 12 00 00 00 24 00 > > usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6 > > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > > usb-storage: Status code 0; transferred 31/31 > > usb-storage: -- transfer complete > > usb-storage: Bulk command transfer result=0 > > usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries > > usb-storage: Status code 0; transferred 36/36 > > usb-storage: -- transfer complete > > usb-storage: Bulk data transfer result 0x0 > > usb-storage: Attempting to get CSW... > > usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes > > usb-storage: Status code 0; transferred 13/13 > > usb-storage: -- transfer complete > > usb-storage: Bulk status result = 0 > > usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0 > > usb-storage: scsi cmd done, result=0x0 > > usb-storage: *** thread sleeping. > > Vendor: WDC WD40 Model: 0BB-00AUA1 Rev: 18.2 > > Type: Direct-Access ANSI SCSI revision: 00 > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Command TEST_UNIT_READY (6 bytes) > > usb-storage: 00 00 00 00 00 00 > > usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6 > > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > > usb-storage: Status code 0; transferred 31/31 > > usb-storage: -- transfer complete > > usb-storage: Bulk command transfer result=0 > > usb-storage: Attempting to get CSW... > > usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes > > usb-storage: Status code 0; transferred 13/13 > > usb-storage: -- transfer complete > > usb-storage: Bulk status result = 0 > > usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x0 > > usb-storage: scsi cmd done, result=0x0 > > usb-storage: *** thread sleeping. > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Command READ_CAPACITY (10 bytes) > > usb-storage: 25 00 00 00 00 00 00 00 00 00 > > usb-storage: Bulk Command S 0x43425355 T 0x3 L 8 F 128 Trg 0 LUN 0 CL 10 > > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > > usb-storage: Status code 0; transferred 31/31 > > usb-storage: -- transfer complete > > usb-storage: Bulk command transfer result=0 > > usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries > > usb-storage: Status code 0; transferred 8/8 > > usb-storage: -- transfer complete > > usb-storage: Bulk data transfer result 0x0 > > usb-storage: Attempting to get CSW... > > usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes > > usb-storage: Status code 0; transferred 13/13 > > usb-storage: -- transfer complete > > usb-storage: Bulk status result = 0 > > usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0 > > usb-storage: scsi cmd done, result=0x0 > > usb-storage: *** thread sleeping. > > SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB) > > sda: assuming drive cache: write through > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Command TEST_UNIT_READY (6 bytes) > > usb-storage: 00 00 00 00 00 00 > > b-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > > usb-storage: Status code 0; transferred 31/31 > > usb-storage: -- transfer complete > > usb-storage: Bulk command transfer result=0 > > usb-storage: Attempting to get CSW... > > usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes > > usb-storage: Status code 0; transferred 13/13 > > usb-storage: -- transfer complete > > usb-storage: Bulk status result = 0 > > usb-storage: Bulk Status S 0x53425355 T 0x4 R 0 Stat 0x0 > > usb-storage: scsi cmd done, result=0x0 > > usb-storage: *** thread sleeping. > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Command READ_CAPACITY (10 bytes) > > usb-storage: 25 00 00 00 00 00 00 00 00 00 > > usb-storage: Bulk Command S 0x43425355 T 0x5 L 8 F 128 Trg 0 LUN 0 CL 10 > > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > > usb-storage: Status code 0; transferred 31/31 > > usb-storage: -- transfer complete > > usb-storage: Bulk command transfer result=0 > > usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries > > usb-storage: Status code 0; transferred 8/8 > > usb-storage: -- transfer complete > > usb-storage: Bulk data transfer result 0x0 > > usb-storage: Attempting to get CSW... > > usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes > > usb-storage: Status code 0; transferred 13/13 > > usb-storage: -- transfer complete > > usb-storage: Bulk status result = 0 > > usb-storage: Bulk Status S 0x53425355 T 0x5 R 0 Stat 0x0 > > usb-storage: scsi cmd done, result=0x0 > > usb-storage: *** thread sleeping. > > SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB) > > sda: assuming drive cache: write through > > sda:<7>usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Command READ_10 (10 bytes) > > usb-storage: 28 00 00 00 00 00 00 00 08 00 > > usb-storage: Bulk Command S 0x43425355 T 0x6 L 4096 F 128 Trg 0 LUN 0 CL 10 > > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > > usb-storage: Status code 0; transferred 31/31 > > usb-storage: -- transfer complete > > usb-storage: Bulk command transfer result=0 > > usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries > > usb-storage: -- transfer complete > > usb-storage: Bulk data transfer result 0x0 > > usb-storage: Attempting to get CSW... > > usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes > > usb-storage: Status code 0; transferred 13/13 > > usb-storage: -- transfer complete > > usb-storage: Bulk status result = 0 > > usb-storage: Bulk Status S 0x53425355 T 0x6 R 0 Stat 0x0 > > usb-storage: scsi cmd done, result=0x0 > > usb-storage: *** thread sleeping. > > sda1 sda2 <<7>usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Command READ_10 (10 bytes) > > usb-storage: 28 00 02 71 16 70 00 00 08 00 > > usb-storage: Bulk Command S 0x43425355 T 0x7 L 4096 F 128 Trg 0 LUN 0 CL 10 > > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > > usb-storage: Status code 0; transferred 31/31 > > usb-storage: -- transfer complete > > usb-storage: Bulk command transfer result=0 > > usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries > > usb-storage: Status code 0; transferred 4096/4096 > > usb-storage: -- transfer complete > > usb-storage: Bulk data transfer result 0x0 > > usb-storage: Attempting to get CSW... > > usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes > > usb-storage: Status code 0; transferred 13/13 > > usb-storage: -- transfer complete > > usb-storage: Bulk status result = 0 > > usb-storage: Bulk Status S 0x53425355 T 0x7 R 0 Stat 0x0 > > usb-storage: scsi cmd done, result=0x0 > > usb-storage: *** thread sleeping. > > sda5 > > > Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Bad target number (1:0) > > usb-storage: scsi cmd done, result=0x40000 > > usb-storage: *** thread sleeping. > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Bad target number (2:0) > > usb-storage: scsi cmd done, result=0x40000 > > usb-storage: *** thread sleeping. > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Bad target number (3:0) > > usb-storage: scsi cmd done, result=0x40000 > > usb-storage: *** thread sleeping. > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Bad target number (4:0) > > usb-storage: scsi cmd done, result=0x40000 > > usb-storage: *** thread sleeping. > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Bad target number (5:0) > > usb-storage: scsi cmd done, result=0x40000 > > usb-storage: *** thread sleeping. > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Bad target number (6:0) > > usb-storage: scsi cmd done, result=0x40000 > > usb-storage: *** thread sleeping. > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Bad target number (7:0) > > usb-storage: scsi cmd done, result=0x40000 > > usb-storage: *** thread sleeping. > > usb-storage: device scan complete > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Command READ_10 (10 bytes) > > usb-storage: 28 00 00 00 00 3f 00 00 01 00 > > usb-storage: Bulk Command S 0x43425355 T 0x8 L 512 F 128 Trg 0 LUN 0 CL 10 > > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > > usb-storage: Status code 0; transferred 31/31 > > usb-storage: -- transfer complete > > usb-storage: Bulk command transfer result=0 > > usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries > > usb-storage: Status code 0; transferred 512/512 > > usb-storage: -- transfer complete > > usb-storage: Bulk data transfer result 0x0 > > usb-storage: Attempting to get CSW... > > usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes > > usb-storage: Status code 0; transferred 13/13 > > usb-storage: -- transfer complete > > usb-storage: Bulk status result = 0 > > usb-storage: Bulk Status S 0x53425355 T 0x8 R 0 Stat 0x0 > > usb-storage: scsi cmd done, result=0x0 > > usb-storage: *** thread sleeping. > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Command READ_10 (10 bytes) > > usb-storage: 28 00 00 00 00 40 00 00 01 00 > > usb-storage: Bulk Command S 0x43425355 T 0x9 L 512 F 128 Trg 0 LUN 0 CL 10 > > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > > usb-storage: Status code 0; transferred 31/31 > > usb-storage: -- transfer complete > > usb-storage: Bulk command transfer result=0 > > usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries > > usb-storage: Status code 0; transferred 512/512 > > usb-storage: -- transfer complete > > usb-storage: Bulk data transfer result 0x0 > > usb-storage: Attempting to get CSW... > > usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes > > usb-storage: Status code 0; transferred 13/13 > > usb-storage: -- transfer complete > > usb-storage: Bulk status result = 0 > > usb-storage: Bulk Status S 0x53425355 T 0x9 R 0 Stat 0x0 > > usb-storage: scsi cmd done, result=0x0 > > usb-storage: *** thread sleeping. > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Command READ_10 (10 bytes) > > usb-storage: Command READ_10 (10 bytes) > > usb-storage: 28 00 00 00 00 65 00 00 01 00 > > usb-storage: Bulk Command S 0x43425355 T 0xa L 512 F 128 Trg 0 LUN 0 CL 10 > > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > > usb-storage: Status code 0; transferred 31/31 > > usb-storage: -- transfer complete > > usb-storage: Bulk command transfer result=0 > > usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries > > usb-storage: Status code 0; transferred 512/512 > > usb-storage: -- transfer complete > > usb-storage: Bulk data transfer result 0x0 > > usb-storage: Attempting to get CSW... > > usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes > > usb-storage: Status code 0; transferred 13/13 > > usb-storage: -- transfer complete > > usb-storage: Bulk status result = 0 > > usb-storage: Bulk Status S 0x53425355 T 0xa R 0 Stat 0x0 > > usb-storage: scsi cmd done, result=0x0 > > usb-storage: *** thread sleeping. > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Command READ_10 (10 bytes) > > usb-storage: 28 00 00 00 01 a7 00 00 01 00 > > usb-storage: Bulk Command S 0x43425355 T 0xb L 512 F 128 Trg 0 LUN 0 CL 10 > > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > > usb-storage: Status code 0; transferred 31/31 > > usb-storage: -- transfer complete > > usb-storage: Bulk command transfer result=0 > > usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries > > usb-storage: Status code 0; transferred 512/512 > > usb-storage: -- transfer complete > > usb-storage: Bulk data transfer result 0x0 > > usb-storage: Attempting to get CSW... > > usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes > > usb-storage: Status code 0; transferred 13/13 > > usb-storage: -- transfer complete > > usb-storage: Bulk status result = 0 > > usb-storage: Bulk Status S 0x53425355 T 0xb R 0 Stat 0x0 > > usb-storage: scsi cmd done, result=0x0 > > usb-storage: *** thread sleeping. > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Command READ_10 (10 bytes) > > usb-storage: 28 00 00 00 1a 65 00 00 01 00 > > usb-storage: Bulk Command S 0x43425355 T 0xc L 512 F 128 Trg 0 LUN 0 CL 10 > > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > > usb-storage: Status code 0; transferred 31/31 > > usb-storage: -- transfer complete > > usb-storage: Bulk command transfer result=0 > > usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries > > usb-storage: Status code 0; transferred 512/512 > > usb-storage: -- transfer complete > > usb-storage: Bulk data transfer result 0x0 > > usb-storage: Attempting to get CSW... > > usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes > > usb-storage: Status code 0; transferred 13/13 > > usb-storage: -- transfer complete > > usb-storage: Bulk status result = 0 > > usb-storage: Bulk Status S 0x53425355 T 0xc R 0 Stat 0x0 > > usb-storage: scsi cmd done, result=0x0 > > usb-storage: *** thread sleeping. > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Command READ_10 (10 bytes) > > usb-storage: 28 00 00 00 1e 8b 00 00 01 00 > > usb-storage: Bulk Command S 0x43425355 T 0xd L 512 F 128 Trg 0 LUN 0 CL 10 > > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > > usb-storage: Status code 0; transferred 31/31 > > usb-storage: -- transfer complete > > usb-storage: Bulk command transfer result=0 > > usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries > > usb-storage: Status code 0; transferred 512/512 > > usb-storage: -- transfer complete > > usb-storage: Bulk data transfer result 0x0 > > usb-storage: Attempting to get CSW... > > usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes > > usb-storage: Status code 0; transferred 13/13 > > usb-storage: -- transfer complete > > usb-storage: Bulk status result = 0 > > usb-storage: Bulk Status S 0x53425355 T 0xd R 0 Stat 0x0 > > usb-storage: scsi cmd done, result=0x0 > > usb-storage: *** thread sleeping. > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Command READ_10 (10 bytes) > > usb-storage: 28 00 00 00 1e af 00 00 01 00 > > usb-storage: Bulk Command S 0x43425355 T 0xe L 512 F 128 Trg 0 LUN 0 CL 10 > > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > > usb-storage: Status code 0; transferred 31/31 > > usb-storage: -- transfer complete > > usb-storage: Bulk command transfer result=0 > > > > usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries > > usb-storage: Status code 0; transferred 512/512 > > usb-storage: -- transfer complete > > usb-storage: Bulk data transfer result 0x0 > > usb-storage: Attempting to get CSW... > > usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes > > usb-storage: Status code 0; transferred 13/13 > > usb-storage: -- transfer complete > > usb-storage: Bulk status result = 0 > > usb-storage: Bulk Status S 0x53425355 T 0xe R 0 Stat 0x0 > > usb-storage: scsi cmd done, result=0x0 > > usb-storage: *** thread sleeping. > > usb-storage: queuecommand called > > usb-storage: *** thread awakened. > > usb-storage: Command READ_10 (10 bytes) > > usb-storage: 28 00 00 00 4e 7f 00 00 20 00 > > usb-storage: Bulk Command S 0x43425355 T 0xf L 16384 F 128 Trg 0 LUN 0 CL 10 > > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > > usb-storage: Status code 0; transferred 31/31 > > usb-storage: -- transfer complete > > usb-storage: Bulk command transfer result=0 > > usb-storage: usb_stor_bulk_transfer_sglist: xfer 16384 bytes, 4 entries > > usb-storage: Status code 0; transferred 16384/16384
This part of the log doesn't show any errors. You need to send the part containing the errors; otherwise there's no way to tell what's going wrong. Alan Stern ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click _______________________________________________ Linux-usb-users@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
