Stephen J. Gowdy wrote:
In taht case I presume CDCEther doesn't think it can drive your device.
What is in /proc/bus/usb/devices?
T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 2
P: Vendor=0525 ProdID=a4a2 Rev= 2.12
S: Manufacturer=Linux 2.6.11/net2272
S: Product=RNDIS/Ethernet Gadget
C:* #Ifs= 2 Cfg#= 2 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=(none)
E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=(none)
E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
As you can see I have "driver = none", and tht's the problem, what
driver do I need.?
tj
On Mon, 28 Nov 2005, tj wrote:
Yep,
# lsmod | grep CDC
CDCEther 12412 0 (unused)
usbcore 62016 1 [CDCEther uhci ehci-hcd]
<Notice CDCEther is loaded and my device is plugged in>
# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:60:94:23:8B:57
inet addr:192.168.1.205 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12072 errors:0 dropped:0 overruns:0 frame:0
TX packets:10006 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:6417255 (6.1 Mb) TX bytes:1300584 (1.2 Mb)
Interrupt:11 Base address:0x3000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:140 errors:0 dropped:0 overruns:0 frame:0
TX packets:140 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:16075 (15.6 Kb) TX bytes:16075 (15.6 Kb)
So ifconfig shows no sign of it.
Jeff
Stephen J. Gowdy wrote:
Did you try "ifconfig -a"?
On Sun, 27 Nov 2005, tj wrote:
What device do you ifconfig for the CDCEther module? I plug in a usb
cabel and I see in /proc/bus/usb/devices
S: Manufacturer=Linux/net2272
S: Product=RNDIS/Ethernet Gadget
I modprobe CDCEther and
#dmesg
CDCEther.c: CDCEther.c: 0.98.6 7 Jan 2002 Brad Hards and another
usb.c: registered new driver CDCEther
usb.c: USB disconnect on device 00:10.3-6 address 2
hub.c: new USB device 00:10.3-6, assigned address 3
usb.c: USB device 3 (vend/prod 0x525/0xa4a2) is not claimed by any
active driver
BAn ifconfig shows my lo and my eth0 network adapter, but nothing about
the usb. But, nothign that hints at the usb CDCEther.
So what am I missing? Or, where is a complete howto on how to do it?
tj
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
--
/------------------------------------+-------------------------\
|Stephen J. Gowdy | SLAC, MailStop 34, |
|http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, |
|http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA |
|EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 |
\------------------------------------+-------------------------/
--
/------------------------------------+-------------------------\
|Stephen J. Gowdy | SLAC, MailStop 34, |
|http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, |
|http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA |
|EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 |
\------------------------------------+-------------------------/
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
