On Tue, 13 Dec 2005, Peter Rasmussen wrote: > Thanks for helping, the following is what I got. > > Peter > > Your patch applied to a 2.6.15-rc5 kernel. > > From /var/log/messages: > > Dec 12 23:58:08 kultorvet kernel: ohci_hcd 0000:00:02.0: wakeup > Dec 12 23:58:09 kultorvet kernel: usb 1-2: new full speed USB device > using ohci_hcd and address 6 > Dec 12 23:58:09 kultorvet kernel: usb 1-2: Product: ix-30 > Dec 12 23:58:09 kultorvet kernel: usb 1-2: Manufacturer: PRIMAX > Dec 12 23:58:09 kultorvet kernel: scsi0 : SCSI emulation for USB Mass > Storage devices > Dec 12 23:58:14 kultorvet kernel: Vendor: Model: > Rev: > Dec 12 23:58:14 kultorvet kernel: Type: Direct-Access > ANSI SCSI revision: 00 > Dec 12 23:58:17 kultorvet kernel: usb 1-2: reset full speed USB device > using ohci_hcd and address 6 > Dec 12 23:58:19 kultorvet last message repeated 3 times > Dec 12 23:58:19 kultorvet kernel: usb 1-2: USB disconnect, address 6 > Dec 12 23:58:19 kultorvet kernel: sda : READ CAPACITY failed.
Well, that's more than you got before. :-) But it sure doesn't look right. These errors shouldn't occur unless something else is wrong. Please turn on USB Mass Storage verbose debugging in the kernel configuration (CONFIG_USB_STORAGE_DEBUG), and then post the dmesg log showing what happens when you plug in the device. If the log shows nothing better than what we see here, then you'll have to give up on this device. Alan Stern ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
