thanks for the reply!

here is /proc/scsi/scsi:

Attached devices:
Host: scsi9 Channel: 00 Id: 00 Lun: 00
  Vendor: TGE      Model: MP3 Player Disk  Rev: 2.10
  Type:   Direct-Access 

and here is /var/log/messages:

Feb  7 08:49:58 linux kernel: usb 1-6: new high speed USB device using 
ehci_hcd and address 12
Feb  7 08:49:58 linux syslog-ng[3615]: STATS: dropped 0
Feb  7 08:49:58 linux kernel: scsi9 : SCSI emulation for USB Mass Storage 
devices
Feb  7 08:49:58 linux kernel: usb-storage: device found at 12
Feb  7 08:49:58 linux kernel: usb-storage: waiting for device to settle before 
scanning
Feb  7 08:50:03 linux kernel:   Vendor: TGE       Model: MP3 Player Disk   
Rev: 2.10
Feb  7 08:50:03 linux kernel:   Type:   Direct-Access                      
ANSI SCSI revision: 02
Feb  7 08:50:03 linux kernel: SCSI device sda: 38997488 512-byte hdwr sectors 
(19967 MB)
Feb  7 08:50:03 linux kernel: sda: Write Protect is off
Feb  7 08:50:03 linux kernel: sda: Mode Sense: 03 00 00 00
Feb  7 08:50:03 linux kernel: sda: assuming drive cache: write through
Feb  7 08:50:03 linux kernel: SCSI device sda: 38997488 512-byte hdwr sectors 
(19967 MB)
Feb  7 08:50:03 linux kernel: sda: Write Protect is off
Feb  7 08:50:03 linux kernel: sda: Mode Sense: 03 00 00 00
Feb  7 08:50:03 linux kernel: sda: assuming drive cache: write through
Feb  7 08:50:06 linux kernel:  sda:<6>SCSI error : <9 0 0 0> return code = 
0x10070000
Feb  7 08:50:06 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:06 linux kernel: printk: 105 messages suppressed.
Feb  7 08:50:06 linux kernel: Buffer I/O error on device sda, logical block 0
Feb  7 08:50:06 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:06 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:06 linux kernel: Buffer I/O error on device sda, logical block 0
Feb  7 08:50:06 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:06 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:06 linux kernel: Buffer I/O error on device sda, logical block 0
Feb  7 08:50:06 linux kernel:  unable to read partition table
Feb  7 08:50:06 linux kernel: Attached scsi removable disk sda at scsi9, 
channel 0, id 0, lun 0
Feb  7 08:50:06 linux kernel: Attached scsi generic sg0 at scsi9, channel 0, 
id 0, lun 0,  type 0
Feb  7 08:50:06 linux kernel: usb-storage: device scan complete
Feb  7 08:50:07 linux /etc/hotplug.d/block/50-hwscan.hotplug[7405]: new block 
device /block/sda
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 38997248
Feb  7 08:50:07 linux kernel: Buffer I/O error on device sda, logical block 
4874656
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 38997248
Feb  7 08:50:07 linux kernel: Buffer I/O error on device sda, logical block 
4874656
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:07 linux kernel: Buffer I/O error on device sda, logical block 0
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:07 linux kernel: Buffer I/O error on device sda, logical block 0
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:07 linux kernel: Buffer I/O error on device sda, logical block 0
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:07 linux kernel: Buffer I/O error on device sda, logical block 0
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:07 linux kernel: Buffer I/O error on device sda, logical block 0
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 16
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 16
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 128
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 128
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 128
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 128
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 16
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:07 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:07 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 64
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 64
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 64
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 64
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 64
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 64
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 64
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 64
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 64
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 64
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 64
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 16
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 16
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:08 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:08 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 8
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 24
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 32
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 40
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 48
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 56
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 8
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 8
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 24
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 24
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 56
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 56
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 120
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 120
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 120
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 8
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 16
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 72
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 80
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 88
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 96
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 104
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 112
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 136
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 144
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 152
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 160
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 168
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 176
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 184
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 192
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 8
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 16
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 24
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 32
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 40
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 48
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 56
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 512
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 512
Feb  7 08:50:09 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:09 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:10 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:10 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:10 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:10 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:10 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:10 linux kernel: end_request: I/O error, dev sda, sector 8
Feb  7 08:50:10 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:10 linux kernel: end_request: I/O error, dev sda, sector 16
Feb  7 08:50:10 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:10 linux kernel: end_request: I/O error, dev sda, sector 24
Feb  7 08:50:10 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:10 linux kernel: end_request: I/O error, dev sda, sector 32
Feb  7 08:50:10 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:10 linux kernel: end_request: I/O error, dev sda, sector 40
Feb  7 08:50:10 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:10 linux kernel: end_request: I/O error, dev sda, sector 48
Feb  7 08:50:10 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:10 linux kernel: end_request: I/O error, dev sda, sector 56
Feb  7 08:50:10 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:10 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:10 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:10 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:50:10 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:10 linux kernel: end_request: I/O error, dev sda, sector 8
Feb  7 08:50:10 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:10 linux kernel: end_request: I/O error, dev sda, sector 16
Feb  7 08:50:10 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:10 linux kernel: end_request: I/O error, dev sda, sector 24
Feb  7 08:50:10 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:10 linux kernel: end_request: I/O error, dev sda, sector 32
Feb  7 08:50:10 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:10 linux kernel: end_request: I/O error, dev sda, sector 40
Feb  7 08:50:10 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:10 linux kernel: end_request: I/O error, dev sda, sector 48
Feb  7 08:50:10 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:10 linux kernel: end_request: I/O error, dev sda, sector 56
Feb  7 08:50:10 linux kernel: SCSI error : <9 0 0 0> return code = 0x10070000
Feb  7 08:50:10 linux kernel: end_request: I/O error, dev sda, sector 0
Feb  7 08:52:30 linux su: (to root) lionel on /dev/pts/2

there seem to be a problem.

What is strange is that I can see the device with the Suse hardware tool, but 
cannot access it.


On Monday 06 February 2006 19:41, Stephen J. Gowdy wrote:
> It looks like usb-storage is going to drive it. Does your kernel logs show
> sda (or another scsi disk)? Whats is /proc/scsi/scsi?
>
> On Mon, 6 Feb 2006, lionel moret wrote:
> > Hello!
> >
> > I have some problem with a mp3 player: the Bullit H206C
> >
> > Linux seems to see it, but I cannot access it. Could you help me?
> >
> > here is what is in the /proc/bus/usb/devices file while the device is
> > plugged in.  I am using the kernel 2.6.11.4-21.10 for suse 9.3.
> >
> > Could you help me?
> >
> >  /proc/bus/usb/devices:
> >
> > T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> > B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
> > D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> > P:  Vendor=0000 ProdID=0000 Rev= 2.06
> > S:  Manufacturer=Linux 2.6.11.4-21.10-default uhci_hcd
> > S:  Product=UHCI Host Controller
> > S:  SerialNumber=0000:00:1d.3
> > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
> > I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> > E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
> >
> > T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> > B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
> > D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> > P:  Vendor=0000 ProdID=0000 Rev= 2.06
> > S:  Manufacturer=Linux 2.6.11.4-21.10-default uhci_hcd
> > S:  Product=UHCI Host Controller
> > S:  SerialNumber=0000:00:1d.2
> > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
> > I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> > E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
> >
> > T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> > B:  Alloc= 93/900 us (10%), #Int=  1, #Iso=  0
> > D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> > P:  Vendor=0000 ProdID=0000 Rev= 2.06
> > S:  Manufacturer=Linux 2.6.11.4-21.10-default uhci_hcd
> > S:  Product=UHCI Host Controller
> > S:  SerialNumber=0000:00:1d.0
> > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
> > I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> > E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
> >
> > T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
> > D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> > P:  Vendor=046d ProdID=c016 Rev= 3.40
> > S:  Manufacturer=Logitech
> > S:  Product=Optical USB Mouse
> > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
> > I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
> > E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=10ms
> >
> > T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 8
> > B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
> > D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS= 8 #Cfgs=  1
> > P:  Vendor=0000 ProdID=0000 Rev= 2.06
> > S:  Manufacturer=Linux 2.6.11.4-21.10-default ehci_hcd
> > S:  Product=EHCI Host Controller
> > S:  SerialNumber=0000:00:1d.7
> > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
> > I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> > E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=256ms
> >
> > T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 11 Spd=480 MxCh= 0
> > D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> > P:  Vendor=0ed1 ProdID=7636 Rev= 1.03
> > S:  Manufacturer=???????
> > S:  Product=
> > S:  SerialNumber=????????
> > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> > I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
> > E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> >
> >
> > -------------------------------------------------------
> > This SF.net email is sponsored by: Splunk Inc. Do you grep through log
> > files for problems?  Stop!  Download the new AJAX search engine that
> > makes searching your log files as easy as surfing the  web.  DOWNLOAD
> > SPLUNK!
> > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
> > _______________________________________________
> > Linux-usb-users@lists.sourceforge.net
> > To unsubscribe, use the last form field at:
> > https://lists.sourceforge.net/lists/listinfo/linux-usb-users
>
> --
>  /------------------------------------+-------------------------\
>
> |Stephen J. Gowdy                     | SLAC, MailStop 34,       |
> |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road,     |
> |http://calendar.yahoo.com/gowdy      | Menlo Park CA 94025, USA |
> |EMail: [EMAIL PROTECTED]       | Tel: +1 650 926 3144     |
>
>  \------------------------------------+-------------------------/


-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Linux-usb-users@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to