Could you have the sync option on on your filesystem? On Fri, 17 Feb 2006, Yann Le [ISO-8859-1] Doaré wrote:
> Hi, > > I build kernels for my distro (http://linuxconsole.org), but there is a > mistake I can't resolve : > > Writing to usb-disks is very slow (~5k/s) (Buring to USB CDROM is OK). > I tried kernels 2.4.30, 2.4.32, 2.6.15.1 ... without success ... but > ubuntu writes to 60k/s > > here is my /proc/bus/usb/devices : > > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.06 > S: Manufacturer=Linux 2.6.15.1 uhci_hcd > S: Product=UHCI Host Controller > S: SerialNumber=0000:00:1f.4 > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.06 > S: Manufacturer=Linux 2.6.15.1 uhci_hcd > S: Product=UHCI Host Controller > S: SerialNumber=0000:00:1f.2 > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=10d6 ProdID=1100 Rev= 1.00 > S: Product=USB 2.0(FS) FLASH DISK > S: SerialNumber=USB 2.0(FS) FLASH DISK > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=05 Prot=50 > Driver=usb-storage > E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > and the /proc/bus/usb/devices booting from UBUNTU LIVE CD (writing is OK > with that disto) > > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.06 > S: Manufacturer=Linux 2.6.12-9-386 uhci_hcd > S: Product=Intel Corporation 82801BA/BAM USB (Hub #2) > S: SerialNumber=0000:00:1f.4 > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.06 > S: Manufacturer=Linux 2.6.12-9-386 uhci_hcd > S: Product=Intel Corporation 82801BA/BAM USB (Hub #1) > S: SerialNumber=0000:00:1f.2 > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=10d6 ProdID=1100 Rev= 1.00 > S: Product=USB 2.0(FS) FLASH DISK > S: SerialNumber=USB 2.0(FS) FLASH DISK > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=05 Prot=50 > Driver=usb-storage > E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > What is wrong ? > > Greetings. > > Yann Le Doaré > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/
config.gz
Description: GNU Zip compressed data
