Hi Alan, > You seem to be contradicting yourself. Above you confirmed that the drive > works fine once Linux has finished booting, but here you say that the > problem occurs when the Sandisk is the first drive to be used with > ehci-hcd. So if you boot over the network and then plug in the Sandisk, > what happens? > I know that the Sandisk works if I put off the Lexar and then plug in the Sandisk on the EPIA. I know it doesn't work if I boot off the Sandisk on the EPIA. The 'first drive to be used' was me just speculating on how this was possible.
> Apparently the easiest solution is to replace the Sandisk with another > Lexar unit. Hah, yesterday I came to the same conclusion as you have and ordered another Lexar drive! Stupid thing cost about $20, wish I did that before spending hours and hours mucking with it! :( Thanks for the help, -Dan _______________________________________________ Linux-usb-users@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
