On Thu, 7 Sep 2006, Axel Beier wrote:

> Hi all,
> i have a powerram 4GB usb-stick (usb-id 13fe:1a21). After inserting the
> stick i got an error sdf: unknown partition table. dev/sdf was created
> but no /dev/sdf1 (for the first partition).
> I traced down the problem and found:
>    if i call reread-partition-table (ioctl BLKRRPART in a little
> c-program) after inserting the stick, i could mount the partion (sdf1)
> normal - after replugging the stick - the same procedure.....

To find out what goes wrong the first time the partition table gets read, 
you should turn on CONFIG_USB_STORAGE_DEBUG.  Then see what the dmesg log 
says when you plug in the stick.

> I wanted to boot from this stick - must i put my hack on the initrd or
> is there another solution..

There's no way to answer that question until we know the source of the 
problem.

> I had tried to load usb-storage with parameter delay_use=10 , no success...

Alan Stern


-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Linux-usb-users@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to