Hi, Im using Linux 2.6.13 for PXA270.
I have connected a mouse and the mouse is detected. When i do dmesg, i get the usb 1-1: new low speed USB device using pxa27x-ohci and address 10 DEV: registering device: ID = '1-1' bus usb: add device 1-1 bound device '1-1' to driver 'usb' DEV: registering device: ID = '1-1:1.0' bus usb: add device 1-1:1.0 usb: Matched Device 1-1:1.0 with Driver usbhid input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-pxa27x-1 bound device '1-1:1.0' to driver 'usbhid' usb: Bound Device 1-1:1.0 to Driver usbhid When i do 'cat /proc/bus/input/devices': I get the message [EMAIL PROTECTED] /]#cat /proc/bus/input/devices I: Bus=0003 Vendor=046d Product=c001 Version=2010 N: Name="Logitech USB Mouse" P: Phys=usb-pxa27x-1/input0 H: Handlers= event0 B: EV=7 B: KEY=70000 0 0 0 0 0 0 0 0 B: REL=103 The Handler field has only event0, But my mouse is not working?. If i do cat /dev/input/event0. Im able to see characters when i move the mouse, Im also getting interrupts. However, When i run XfbDev and move the mouse, the 'X' mark at the centre does not move. Am i missing something?. Regards, sriram ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Linux-usb-users@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
