Hi,

I have a Logitech S510 wireless mouse/keyboard combo that I am having
a few problems with....

The keyboard randomly repeats keystrokes like thissss, usually when it
happens the leds on receiver blink.

The mouse will at times disappear but keyboard still works. When it
happens I can still connect to the receiver i.e push the connent
button on the receiver and the button on the bottom of the mouse and
it will connect, but moving the mouse around doesnt move the cursor on
screen. I dont get any error messages when it happens even with
debuging enabled in kernel. If I pull the receivers USB plug and
reinsert it I get error message:

ohci_hcd 0000:00:02.0: leak ed f7db5080 (#82) state 0 (has tds)

After reinserting the plug no USB connected hardware will work. Have
to reboot by logging in from other computer, if I do a hard-reset the
BIOS gives a no keyboard error. Only solution is to pull the power
from the wall and wait a few seconds reinsert power-cord and boot.

I dont have these problems in Windows or if I use keyboard/mouse with
the other computer.

Restarting X or other services doesnt help.

motherboard: MSI k8n neo2 platinum

dmesg:
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Bridge: 0000:00:0b.0
  IO window: b000-bfff
  MEM window: fa000000-fcffffff
  PREFETCH window: e8000000-efffffff
PCI: Bridge: 0000:00:0e.0
  IO window: a000-afff
  MEM window: fdf00000-fdffffff
  PREFETCH window: fde00000-fdefffff
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
highmem bounce pool size: 64 pages
io scheduler noop registered
io scheduler cfq registered (default)
Generic RTC Driver v1.07
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected AGP bridge 0
agpgart: Setting up Nforce3 AGP.
agpgart: AGP aperture is 128M @ 0xf0000000
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LMAC] -> GSI 5 (level,
low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:05.0 to 64
eth0: forcedeth.c: subsystem: 01462:0250 bound to 0000:00:05.0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
NFORCE3-250: chipset revision 162
NFORCE3-250: not 100% native mode: will probe irqs later
NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
    ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: ST380011A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SAMSUNG CDRW/DVD SM-352B, ATAPI CD/DVD-ROM drive
hdd: TSSTcorpCD/DVDW SH-W162C, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
  hda: hda1 hda2 hda3 hda4
hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
sata_nv 0000:00:0a.0: version 2.0
ACPI: PCI Interrupt Link [LFID] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LFID] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD000 irq 11
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD008 irq 11
scsi0 : sata_nv
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-6, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : sata_nv
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      ST380817AS       3.42 PQ: 0 ANSI: 5
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
  sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUB2] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: reset hcs_params 0x102488 dbg=1 cc=2 pcc=4 !ppc ports=8
ehci_hcd 0000:00:02.2: reset portroute 0 0 1 1 1 0 1 0
ehci_hcd 0000:00:02.2: reset hcc_params a082 caching frame 256/512/1024
ehci_hcd 0000:00:02.2: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: supports USB remote wakeup
ehci_hcd 0000:00:02.2: irq 11, io mem 0xfe02d000
ehci_hcd 0000:00:02.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
ehci_hcd 0000:00:02.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: default language 0x0409
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.19.2 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.2
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
Initializing USB Mass Storage driver...
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:02.2: port 1 full speed --> companion
ehci_hcd 0000:00:02.2: GetStatus port 1 status 003001 POWER OWNER
sig=se0 CONNECT
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.13 (Tue Nov 28
14:07:24 2006 UTC).
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNK4] -> GSI 3 (level,
low) -> IRQ 3
Audigy2 value: Special config.
ALSA device list:
  #0: Audigy 4 [SB0610] (rev.0, serial:0x10211102) at 0xac00, irq 3
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 136k freed
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNK1] -> GSI 7 (level,
low) -> IRQ 7
NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9746  Fri Dec 15
09:54:45 PST 2006
w83627hf 9191-0290: Reading VID from GPIO5
usb usb1: uevent
usb 1-0:1.0: uevent
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 5 (level,
low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: created debug files
ohci_hcd 0000:00:02.0: irq 5, io mem 0xfe02f000
ohci_hcd 0000:00:02.0: resetting from state 'reset', control = 0x600
ohci_hcd 0000:00:02.0: OHCI controller state
ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:02.0: intrstatus 0x00000044 RHSC SF
ohci_hcd 0000:00:02.0: intrenable 0x8000000a MIE RD WDH
ohci_hcd 0000:00:02.0: hcca frame #0002
ohci_hcd 0000:00:02.0: roothub.a 01000204 POTPGT=1 NPS NDP=4(4)
ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00010101 CSC PPS CCS
ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS
usb usb2: default language 0x0409
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.19.2 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: global over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: no over-current condition exists
hub 2-0:1.0: trying to enable port power on non-switchable hub
hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUBB] -> GSI 10 (level,
low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
drivers/usb/core/inode.c: creating file '003'
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: created debug files
ohci_hcd 0000:00:02.1: irq 10, io mem 0xfe02e000
ohci_hcd 0000:00:02.1: resetting from state 'reset', control = 0x600
ohci_hcd 0000:00:02.1: OHCI controller state
ohci_hcd 0000:00:02.1: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:02.1: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:02.1: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:02.1: intrstatus 0x00000004 SF
ohci_hcd 0000:00:02.1: intrenable 0x8000004a MIE RHSC RD WDH
ohci_hcd 0000:00:02.1: hcca frame #0003
ohci_hcd 0000:00:02.1: roothub.a 01000204 POTPGT=1 NPS NDP=4(4)
ohci_hcd 0000:00:02.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:02.1: roothub.status 00008000 DRWE
ohci_hcd 0000:00:02.1: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:02.1: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:02.1: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:02.1: roothub.portstatus [3] 0x00000100 PPS
usb usb3: default language 0x0409
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.19.2 ohci_hcd
usb usb3: SerialNumber: 0000:00:02.1
usb usb3: uevent
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: global over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: no over-current condition exists
hub 3-0:1.0: trying to enable port power on non-switchable hub
hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103
PRSC PPS PES CCS
usb 2-1: new full speed USB device using ohci_hcd and address 2
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103
PRSC PPS PES CCS
usb 2-1: ep0 maxpacket = 8
usb 2-1: skipped 1 descriptor after interface
usb 2-1: skipped 1 descriptor after interface
usb 2-1: default language 0x0409
usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Receiver
usb 2-1: Manufacturer: Logitech
usb 2-1: uevent
usb 2-1: usb_probe_device
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: adding 2-1:1.0 (config #1, interface 0)
usb 2-1:1.0: uevent
usbhid 2-1:1.0: usb_probe_interface
usbhid 2-1:1.0: usb_probe_interface - got id
input: Logitech USB Receiver as /class/input/input0
input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-1
usb 2-1: adding 2-1:1.1 (config #1, interface 1)
usb 2-1:1.1: uevent
usbhid 2-1:1.1: usb_probe_interface
usbhid 2-1:1.1: usb_probe_interface - got id
input: Logitech USB Receiver as /class/input/input1
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-1
drivers/usb/core/inode.c: creating file '002'
hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000
ohci_hcd 0000:00:02.1: auto-stop root hub
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: replayed 850 transactions in 15 seconds
ReiserFS: hda4: Using r5 hash to sort names
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
Adding 144576k swap on /dev/hda3.  Priority:-1 extents:1 across:144576k
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8191 buckets, 65528 max) - 228 bytes per conntrack
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode

lspci -v:
00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1)
        Subsystem: Micro-Star International Co., Ltd. Unknown device 0250
        Flags: bus master, 66MHz, fast devsel, latency 0
        Memory at f0000000 (32-bit, prefetchable) [size=128M]
        Capabilities: [44] HyperTransport: Slave or Primary Interface
        Capabilities: [c0] AGP version 3.0

00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2)
        Subsystem: Micro-Star International Co., Ltd. Unknown device 0250
        Flags: bus master, 66MHz, fast devsel, latency 0

00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1)
        Subsystem: Micro-Star International Co., Ltd. Unknown device 0250
        Flags: 66MHz, fast devsel, IRQ 7
        I/O ports at fc00 [size=32]
        I/O ports at 4c00 [size=64]
        I/O ports at 4c40 [size=64]
        Capabilities: [44] Power Management version 2

00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev
a1) (prog-if 10 [OHCI])
        Subsystem: Micro-Star International Co., Ltd. Unknown device 0250
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
        Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2

00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev
a1) (prog-if 10 [OHCI])
        Subsystem: Micro-Star International Co., Ltd. Unknown device 0250
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
        Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2

00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0
Controller (rev a2) (prog-if 20 [EHCI])
        Subsystem: Micro-Star International Co., Ltd. Unknown device 0250
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
        Memory at fe02d000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port
        Capabilities: [80] Power Management version 2

00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2)
        Subsystem: Micro-Star International Co., Ltd. Unknown device 0250
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
        Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at f000 [size=8]
        Capabilities: [44] Power Management version 2

00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller
(v2.5) (rev a2) (prog-if 8a [Master SecP PriP])
        Subsystem: Micro-Star International Co., Ltd. Unknown device 0250
        Flags: bus master, 66MHz, fast devsel, latency 0
        I/O ports at e400 [size=16]
        Capabilities: [44] Power Management version 2

00:0a.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller
(v2.5) (rev a2) (prog-if 85 [Master SecO PriO])
        Subsystem: Micro-Star International Co., Ltd. Unknown device 0250
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
        I/O ports at 09f0 [size=8]
        I/O ports at 0bf0 [size=4]
        I/O ports at 0970 [size=8]
        I/O ports at 0b70 [size=4]
        I/O ports at d000 [size=16]
        I/O ports at cc00 [size=128]
        Capabilities: [44] Power Management version 2

00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI
Bridge (rev a2) (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, medium devsel, latency 16
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=10
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: fa000000-fcffffff
        Prefetchable memory behind bridge: e8000000-efffffff

00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge
(rev a2) (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=128
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: fdf00000-fdffffff
        Prefetchable memory behind bridge: fde00000-fdefffff

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
        Flags: fast devsel
        Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
        Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
        Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
        Flags: fast devsel

01:00.0 VGA compatible controller: nVidia Corporation NV40 [GeForce
6800] (rev a1) (prog-if 00 [VGA])
        Subsystem: ASUSTeK Computer Inc. Unknown device 817c
        Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 7
        Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
        Memory at e8000000 (32-bit, prefetchable) [size=128M]
        Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
        [virtual] Expansion ROM at fc000000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [44] AGP version 3.0

02:09.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value
        Subsystem: Creative Labs Unknown device 1021
        Flags: bus master, medium devsel, latency 32, IRQ 3
        I/O ports at ac00 [size=64]
        Capabilities: [dc] Power Management version 2

02:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169
Gigabit Ethernet (rev 10)
        Subsystem: Micro-Star International Co., Ltd. Unknown device 025c
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 10
        I/O ports at a800 [size=256]
        Memory at fdfff000 (32-bit, non-prefetchable) [size=256]
        [virtual] Expansion ROM at fde00000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2

Need to know anything else? Thanks for any help!

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Linux-usb-users@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to