Hi Alan We are not still able to get the device to respond .The command sequence that we are using:
1. Read 10 - response is STALL. We then clear feature command. And a Bulk in to retrieve the CSW of failed Read 10. 2. Request Sense: 18 bytes of sense data and CSW. Sense data shows 06 - UNIT Attention condition. 3. Read 10 Stall again. How do we resolve this issue? We are using an OHCI controller and the device is USB 2.0 compatible. Is this a factor? Should we give a specific amount of time between a UNIT ATTENTION condition and next Read 10. We have also noted that all medium access commands fail but others like Read Capacity, TUR, is successful. PS: Siddharth is my mentor. Yours truly, vineeth -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alan Stern Sent: Sunday, June 10, 2007 8:41 PM To: Karnik, Siddharth (IE10) Cc: [EMAIL PROTECTED] Subject: Re: [usb-storage] Mass storage device NAK's On Sun, 10 Jun 2007, Karnik, Siddharth (IE10) wrote: > Thanks alan, > > > > As you said The problem of continuous NAK's was from my computer,it was > issuing IN's. > > > > But I am still not able to get around with the original problem of > Read10 command Naking.I am pasting my trace as below. Please let me know > where am I going wrong > > > > > > > > Then I issue read 10(same command issues earlier) > > > > > > > > This results in series of Nak's and device never sends data even after > long wait. > > > > Kindly let me know what should be done. Try using a different device. Alan Stern _______________________________________________ Usb-storage mailing list [EMAIL PROTECTED] https://lists.one-eyed-alien.net/mailman/listinfo/usb-storage ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Linux-usb-users@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
