Thanks a lot, my problem was that proper codepage was not installed indeed!
Thank You again, Leonid. -----Original Message----- From: Matthew Dharm [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 12, 2007 4:49 PM To: Leonid Cc: linux-usb-users@lists.sourceforge.net Subject: Re: [Linux-usb-users] USB Mass Storage on at91rm9200-ek On Tue, Jun 12, 2007 at 03:56:19PM -0700, Leonid wrote: > However mount fails (stick has VFAT filesystem on it): > > ~ # mount -t vfat /dev/sda /mnt/ > FAT: invalid media value (0x00) > VFS: Can't find a valid FAT filesystem on dev sda. > mount: Mounting /dev/sda on /mnt failed: Invalid argument > ~ # mount -t vfat /dev/sda1 /mnt/ Unable to load NLS charset cp437 > FAT: codepage cp437 not found > mount: Mounting /dev/sda1 on /mnt failed: Invalid argument You need both the proper codepage and to use /dev/sda1 > Note that codeset 437 is specified in kernel configuration as default. When I replaced it by "ascii" (same as on my Linux desktop where the same flash works) it fails anyway: > > ~ # mount /dev/sda /mnt/ Now you've failed to specify /dev/sda1, and failed to specify vfat. > ~ # mount -t vfat /dev/sda /mnt/ Now you've failed to specify /dev/sda1 again. Try: mount -t vfat /dev/sda1 /mnt/ With your default codepage set to ascii. Or, just make sure that whatever codepage you have selected as your default is either loaded as a module or compiled-in to your kernel. Matt -- Matthew Dharm Home: [EMAIL PROTECTED] Maintainer, Linux USB Mass Storage Driver It was a new hope. -- Dust Puppy User Friendly, 12/25/1998 ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Linux-usb-users@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
