On Sat, 28 Jul 2007, Jean-Claude Repetto wrote: > Sorry, my fault. This is the right log :
> Jul 28 08:39:53 corborant sd 2:0:0:0: [sdb] Spinning up > disk...<7>usb-storage: queuecommand called > Jul 28 08:39:53 corborant usb-storage: *** thread awakened. > Jul 28 08:39:53 corborant usb-storage: Command START_STOP (6 bytes) Okay, that's the command Matt suggested. > Jul 28 08:39:53 corborant usb-storage: 1b 01 00 00 01 00 > Jul 28 08:39:53 corborant usb-storage: Bulk Command S 0x43425355 T 0x8 L > 0 F 0 Trg 0 LUN 0 CL 6 > Jul 28 08:39:53 corborant usb-storage: usb_stor_bulk_transfer_buf: xfer > 31 bytes > Jul 28 08:39:53 corborant usb-storage: Status code 0; transferred 31/31 > Jul 28 08:39:53 corborant usb-storage: -- transfer complete > Jul 28 08:39:53 corborant usb-storage: Bulk command transfer result=0 > Jul 28 08:39:53 corborant usb-storage: Attempting to get CSW... > Jul 28 08:39:53 corborant usb-storage: usb_stor_bulk_transfer_buf: xfer > 13 bytes > Jul 28 08:39:53 corborant usb-storage: Status code 0; transferred 13/13 > Jul 28 08:39:53 corborant usb-storage: -- transfer complete > Jul 28 08:39:53 corborant usb-storage: Bulk status result = 0 > Jul 28 08:39:53 corborant usb-storage: Bulk Status S 0x53425355 T 0x8 R > 0 Stat 0x0 > Jul 28 08:39:53 corborant usb-storage: scsi cmd done, result=0x0 > Jul 28 08:39:53 corborant usb-storage: *** thread sleeping. > Jul 28 08:39:54 corborant .<7>usb-storage: queuecommand called > Jul 28 08:39:54 corborant usb-storage: *** thread awakened. > Jul 28 08:39:54 corborant usb-storage: Command TEST_UNIT_READY (6 bytes) > Jul 28 08:39:54 corborant usb-storage: 00 00 00 00 00 00 > Jul 28 08:39:54 corborant usb-storage: Bulk Command S 0x43425355 T 0x9 L > 0 F 0 Trg 0 LUN 0 CL 6 > Jul 28 08:39:54 corborant usb-storage: usb_stor_bulk_transfer_buf: xfer > 31 bytes > Jul 28 08:39:54 corborant usb-storage: Status code 0; transferred 31/31 > Jul 28 08:39:54 corborant usb-storage: -- transfer complete > Jul 28 08:39:54 corborant usb-storage: Bulk command transfer result=0 > Jul 28 08:39:54 corborant usb-storage: Attempting to get CSW... > Jul 28 08:39:54 corborant usb-storage: usb_stor_bulk_transfer_buf: xfer > 13 bytes > Jul 28 08:39:54 corborant usb-storage: Status code 0; transferred 13/13 > Jul 28 08:39:54 corborant usb-storage: -- transfer complete > Jul 28 08:39:54 corborant usb-storage: Bulk status result = 0 > Jul 28 08:39:54 corborant usb-storage: Bulk Status S 0x53425355 T 0x9 R > 0 Stat 0x1 > Jul 28 08:39:54 corborant usb-storage: -- transport indicates command > failure > Jul 28 08:39:54 corborant usb-storage: Issuing auto-REQUEST_SENSE > Jul 28 08:39:54 corborant usb-storage: Bulk Command S 0x43425355 T 0xa L > 18 F 128 Trg 0 LUN 0 CL 6 > Jul 28 08:39:54 corborant usb-storage: usb_stor_bulk_transfer_buf: xfer > 31 bytes > Jul 28 08:39:54 corborant usb-storage: Status code 0; transferred 31/31 > Jul 28 08:39:54 corborant usb-storage: -- transfer complete > Jul 28 08:39:54 corborant usb-storage: Bulk command transfer result=0 > Jul 28 08:39:54 corborant usb-storage: usb_stor_bulk_transfer_buf: xfer > 18 bytes > Jul 28 08:39:54 corborant usb-storage: Status code 0; transferred 14/18 > Jul 28 08:39:54 corborant usb-storage: -- short transfer > Jul 28 08:39:54 corborant usb-storage: Bulk data transfer result 0x1 > Jul 28 08:39:54 corborant usb-storage: Attempting to get CSW... > Jul 28 08:39:54 corborant usb-storage: usb_stor_bulk_transfer_buf: xfer > 13 bytes > Jul 28 08:39:54 corborant usb-storage: Status code 0; transferred 13/13 > Jul 28 08:39:54 corborant usb-storage: -- transfer complete > Jul 28 08:39:54 corborant usb-storage: Bulk status result = 0 > Jul 28 08:39:54 corborant usb-storage: Bulk Status S 0x53425355 T 0xa R > 4 Stat 0x0 > Jul 28 08:39:54 corborant usb-storage: -- Result from auto-sense is 0 > Jul 28 08:39:54 corborant usb-storage: -- code: 0x70, key: 0x2, ASC: > 0x3a, ASCQ: 0x0 > Jul 28 08:39:54 corborant usb-storage: (Unknown Key): (unknown ASC/ASCQ) > Jul 28 08:39:54 corborant usb-storage: scsi cmd done, result=0x2 > Jul 28 08:39:54 corborant usb-storage: *** thread sleeping. But apparently it didn't help. > Jul 28 08:39:54 corborant usb-storage: queuecommand called > Jul 28 08:39:54 corborant usb-storage: *** thread awakened. > Jul 28 08:39:54 corborant usb-storage: Command TEST_UNIT_READY (6 bytes) > Jul 28 08:39:54 corborant usb-storage: 00 00 00 00 00 00 > Jul 28 08:39:54 corborant usb-storage: Bulk Command S 0x43425355 T 0xb L > 0 F 0 Trg 0 LUN 0 CL 6 > Jul 28 08:39:54 corborant usb-storage: usb_stor_bulk_transfer_buf: xfer > 31 bytes > Jul 28 08:39:54 corborant usb-storage: Status code 0; transferred 31/31 > Jul 28 08:39:54 corborant usb-storage: -- transfer complete > Jul 28 08:39:54 corborant usb-storage: Bulk command transfer result=0 > Jul 28 08:39:54 corborant usb-storage: Attempting to get CSW... > Jul 28 08:39:54 corborant usb-storage: usb_stor_bulk_transfer_buf: xfer > 13 bytes > Jul 28 08:39:55 corborant usb-storage: Status code -84; transferred 0/13 > Jul 28 08:39:55 corborant usb-storage: -- unknown error > Jul 28 08:39:55 corborant usb-storage: Bulk status result = 4 > Jul 28 08:39:55 corborant usb-storage: -- transport indicates error, > resetting And then the device disconnected itself. I'm not sure what to suggest. Does the device work okay under other operating systems? Alan Stern ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Linux-usb-users@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
