Hi there
I have a pretty strange problem. I can use my USB-Keyboard, USB-Mouse,
USB-XBox360 Wireless Adapter and USB-Storage stick but no USB gamepads.
I tried the Logitech Rumblepack 2 and Logitech Dual Action (which should
be supported out-of-the-box). For both I loaded the joydev drivers,
later I tried all *.ko I've found under the drivers/input directory with
no success.
Both gamepads result in the following messages as I plug them in:
Jul 31 20:06:34 discjockey kernel: usb 1-10: new low speed USB device
using ohci_hcd and address 9
Jul 31 20:06:34 discjockey kernel: usb 1-10: device not accepting
address 9, error -71
Jul 31 20:06:34 discjockey kernel: usb 1-10: new low speed USB device
using ohci_hcd and address 10
Jul 31 20:06:35 discjockey kernel: usb 1-10: device descriptor read/all,
error -84
Jul 31 20:06:35 discjockey kernel: usb 1-10: new low speed USB device
using ohci_hcd and address 11
Jul 31 20:06:35 discjockey kernel: usb 1-10: device descriptor read/all,
error -84
Jul 31 20:06:35 discjockey kernel: usb 1-10: new low speed USB device
using ohci_hcd and address 12
Jul 31 20:06:35 discjockey kernel: usb 1-10: device descriptor read/8,
error -84
Jul 31 20:06:36 discjockey kernel: usb 1-10: device descriptor read/8,
error -71
I tried several solutions on the net but noone helped. The things I
tried included: noapic boot option (and some others like IRQ routing
stuff), trying different USB ports and fiddling around in the BIOS
(deactivating USB2.0 support and things like that). I also tried to plug
the gamepads in all USB-slots I've found (so on the front and backside).
Here are some system informations:
Kernel: Linux Fedora 7 with 2.6.22.1-33.fc7 SMP x86_64
Motherboard: ASROCK ALIVENF6G-DVI, nVidia nForce 430
Below you'll find the output of dmesg and lsusb -v. The USB device
you'll see is an iMon LCD device (the PC acts as a media center).
I hope you can help me, I have no clue what's wrong. The thing never
worked yet (since 2 Kernel updates).
Best regards & thanks
Joel
P.S. I got denied twice by filter rules.. doesn't the list accept
attachments?
Linux version 2.6.22.1-33.fc7
([EMAIL PROTECTED]) (gcc version 4.1.2 20070502
(Red Hat 4.1.2-12)) #1 SMP Mon Jul 23 16:59:15 EDT 2007
Command line: ro root=/dev/Volumes/rootVol rhgb quiet noapic
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007bfb0000 (usable)
BIOS-e820: 000000007bfb0000 - 000000007bfc0000 (ACPI data)
BIOS-e820: 000000007bfc0000 - 000000007bff0000 (ACPI NVS)
BIOS-e820: 000000007bff0000 - 000000007c000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 507824) 1 entries of 3200 used
end_pfn_map = 1048576
DMI present.
ACPI: RSDP 000FA2D0, 0014 (r0 ACPIAM)
ACPI: RSDT 7BFB0000, 0038 (r1 A M I OEMRSDT 9000626 MSFT 97)
ACPI: FACP 7BFB0200, 0084 (r2 A M I OEMFACP 9000626 MSFT 97)
ACPI: DSDT 7BFB0440, 4F93 (r1 ALVN6 ALVN6134 134 INTL 20051117)
ACPI: FACS 7BFC0000, 0040
ACPI: APIC 7BFB0390, 0070 (r1 A M I OEMAPIC 9000626 MSFT 97)
ACPI: MCFG 7BFB0400, 003C (r1 A M I OEMMCFG 9000626 MSFT 97)
ACPI: OEMB 7BFC0040, 0060 (r1 A M I AMI_OEM 9000626 MSFT 97)
ACPI: HPET 7BFB53E0, 0038 (r1 A M I OEMHPET0 9000626 MSFT 97)
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000007bfb0000
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 507824) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000007bfb0000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 157
0: 256 -> 507824
On node 0 totalpages: 507725
DMA zone: 56 pages used for memmap
DMA zone: 1302 pages reserved
DMA zone: 2639 pages, LIFO batch:0
DMA32 zone: 6886 pages used for memmap
DMA32 zone: 496842 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: Skipping IOAPIC probe due to 'noapic' option.
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: TEMPLATE MPTABLE: Product ID: ETEMPLATE MPTABLE:
APIC at: 0xFEE00000
I/O APIC #2 at 0xFEC00000.
Setting APIC routing to flat
Processors: 2
swsusp: Registered nosave memory region: 000000000009d000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000
swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7c000000:82c00000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 40968 bytes of per cpu data
Built 1 zonelists. Total pages: 499481
Kernel command line: ro root=/dev/Volumes/rootVol rhgb quiet noapic
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2023.468 MHz processor.
Console: colour VGA+ 80x25
Checking aperture...
CPU 0: aperture @ 790000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 1992988k/2031296k available (2361k kernel code, 37912k reserved,
1401k data, 312k init)
SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 4050.16 BogoMIPS
(lpj=2025083)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0c20)
Using local APIC timer interrupts.
result 13312293
Detected 13.312 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
spurious 8259A interrupt: IRQ7.
Calibrating delay using timer specific routine.. 4054.14 BogoMIPS
(lpj=2027072)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 01
Brought up 2 CPUs
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=208 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2048 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
Error attaching device data
Error attaching device data
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:04.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11 14)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs *5 7 10 11 14)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 *10 11 14)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 5 7 *10 11 14)
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 10 *11 14)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 5 7 10 *11 14)
ACPI: PCI Interrupt Link [LSA1] (IRQs *5 7 10 11 14)
ACPI: PCI Interrupt Link [LATA] (IRQs 5 7 10 11 14) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
ACPI: RTC can wake from S4
pnp: 00:06: iomem range 0x0-0x0 could not be reserved
pnp: 00:06: iomem range 0xfefe0000-0xfefe01ff has been reserved
pnp: 00:06: iomem range 0xfefe1000-0xfefe1fff has been reserved
pnp: 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
pnp: 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
pnp: 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
pnp: 00:0b: ioport range 0x290-0x29f has been reserved
pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0d: iomem range 0xc0000-0xcffff has been reserved
pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
Time: hpet clocksource has been installed.
PCI: Bridge: 0000:00:04.0
IO window: e000-efff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3758k freed
audit: initializing netlink socket (disabled)
audit(1185902047.504:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 84686AF648AEAA42
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:0d.0
PCI: Setting latency timer of device 0000:00:09.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:09.0:pcie00]
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
hpet_resources: 0xfed00000 is busy
Generic RTC Driver v1.07
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+
processors (version 2.00.00)
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 312k freed
Write protecting the kernel read-only data: 1060k
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 5 (level, low)
-> IRQ 5
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 5, io mem 0xdfffb000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
SCSI subsystem initialized
libata version 2.21 loaded.
sata_nv 0000:00:08.0: version 3.4
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:08.0 to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x0000000000010e00 ctl 0x0000000000010e22
bmdma 0x000000000001c880 irq 11
ata2: SATA max UDMA/133 cmd 0x0000000000010e40 ctl 0x0000000000010962
bmdma 0x000000000001c888 irq 11
usb 1-5: new low speed USB device using ohci_hcd and address 2
usb 1-5: configuration #1 chosen from 1 choice
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: SAMSUNG SP2504C, VT100-54, max UDMA7
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
usb 1-7: new low speed USB device using ohci_hcd and address 3
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 1-7: device descriptor read/all, error -84
ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S183A, SB02, max UDMA/33
ata2.00: applying bridge limits
usb 1-7: new low speed USB device using ohci_hcd and address 4
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183A SB02 PQ: 0 ANSI: 5
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:08.1[B] -> Link [LSA1] -> GSI 5 (level, low)
-> IRQ 5
PCI: Setting latency timer of device 0000:00:08.1 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x0000000000010e80 ctl 0x0000000000010ea2
bmdma 0x000000000001c000 irq 5
ata4: SATA max UDMA/133 cmd 0x0000000000010ec0 ctl 0x0000000000010ee2
bmdma 0x000000000001c008 irq 5
usb 1-7: device descriptor read/all, error -84
usb 1-7: new low speed USB device using ohci_hcd and address 5
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: SAMSUNG SP2504C, VT100-54, max UDMA7
ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
usb 1-7: device descriptor read/8, error -71
usb 1-7: device descriptor read/8, error -84
ata4: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdb: sdb1 sdb2 sdb3
sd 2:0:0:0: [sdb] Attached SCSI disk
usb 1-7: new low speed USB device using ohci_hcd and address 6
usb 1-7: device not accepting address 6, error -71
usb 1-8: new full speed USB device using ohci_hcd and address 7
usb 1-8: configuration #1 chosen from 1 choice
usb 1-10: new full speed USB device using ohci_hcd and address 8
usb 1-10: configuration #1 chosen from 1 choice
pata_amd 0000:00:06.0: version 0.3.8
PCI: Setting latency timer of device 0000:00:06.0 to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6
bmdma 0x000000000001ffa0 irq 14
ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376
bmdma 0x000000000001ffa8 irq 15
ata6: port disabled. ignoring.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
[EMAIL PROTECTED]
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1185902056.071:2): selinux=0 auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x6000
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
Initializing USB Mass Storage driver...
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
scsi6 : SCSI emulation for USB Mass Storage devices
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LMAC] -> GSI 10 (level,
low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:07.0 to 64
forcedeth: using HIGHDMA
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
lirc_dev: IR Remote Control driver registered, at major 61
lirc_imon: no version for "lirc_unregister_plugin" found: kernel tainted.
/tmp/lirc-0.8.2/drivers/lirc_imon/lirc_imon.c: Driver for Soundgraph
iMON MultiMedian IR/VFD w/imon pad2keys patch, v0.3p2k
/tmp/lirc-0.8.2/drivers/lirc_imon/lirc_imon.c: Venky Raju <[EMAIL PROTECTED]>
/tmp/lirc-0.8.2/drivers/lirc_imon/lirc_imon.c: imon_probe: found IMON device
lirc_dev: lirc_register_plugin: sample_rate: 0
/tmp/lirc-0.8.2/drivers/lirc_imon/lirc_imon.c: imon_probe: Registered
iMON plugin (minor:0)
/tmp/lirc-0.8.2/drivers/lirc_imon/lirc_imon.c: imon_probe: iMON device
on usb<1:2> initialized
usbcore: registered new interface driver lirc_imon
nvidia: module license 'NVIDIA' taints kernel.
eth0: forcedeth.c: subsystem: 01849:03ef bound to 0000:00:07.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LMC9] -> GSI 10 (level,
low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:0d.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.11 Wed Jun 13
16:33:22 PDT 2007
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKA] -> GSI 10 (level,
low) -> IRQ 10
loop: module loaded
floppy0: no floppy controllers found
lp0: using parport0 (interrupt-driven).
lp0: console ready
No dock devices found.
input: Power Button (FF) as /class/input/input1
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
device-mapper: multipath: version 1.0.5 loaded
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access Kingston DataTraveler II+ 1.13 PQ: 0
ANSI: 0 CCS
sd 6:0:0:0: [sdc] 2014208 512-byte hardware sectors (1031 MB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] 2014208 512-byte hardware sectors (1031 MB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 6:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg3 type 0
EXT3 FS on dm-4, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
Adding 1048568k swap on /dev/Volumes/swapVol. Priority:-1 extents:1
across:1048568k
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
audit(1185902078.160:3): audit_pid=2240 old=0 by auid=4294967295
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
/tmp/lirc-0.8.2/drivers/lirc_imon/lirc_imon.c: VFD port opened
eth0: no IPv6 routers present
/tmp/lirc-0.8.2/drivers/lirc_imon/lirc_imon.c: IR port opened
usb 1-10: USB disconnect, address 8
usb 1-8: USB disconnect, address 7
usb 1-10: new low speed USB device using ohci_hcd and address 9
usb 1-10: device not accepting address 9, error -71
usb 1-10: new low speed USB device using ohci_hcd and address 10
usb 1-10: device descriptor read/all, error -84
usb 1-10: new low speed USB device using ohci_hcd and address 11
usb 1-10: device descriptor read/all, error -84
usb 1-10: new low speed USB device using ohci_hcd and address 12
usb 1-10: device descriptor read/8, error -84
usb 1-10: device descriptor read/8, error -71
----------------------------------------------------------------------------------------------------------------------
Bus 001 Device 002: ID 15c2:ffdc SoundGraph Inc. iMON PAD Remote Controller
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x15c2 SoundGraph Inc.
idProduct 0xffdc iMON PAD Remote Controller
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 0 (Defined at Interface level)
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.22.1-33.fc7 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:02.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 10
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x60
PortPwrCtrlMask 0xb7 0x94
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0303 lowspeed power enable connect
Port 6: 0000.0100 power
Port 7: 0000.0300 lowspeed power
Port 8: 0000.0100 power
Port 9: 0000.0100 power
Port 10: 0000.0301 lowspeed power connect
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
