On Sun, 30 Sep 2007, The Almighty Pegasus Epsilon wrote:
> sg1 is a character device, not a block device. sg1 is the HID device
> in the composite device, where I need the mass storage device, which
> is a block device.
Strictly speaking, "character" and "block" are properties of the
driver, not of the device. It's perfectly possible to have both a
character driver and a block driver for the same device (although they
better not both be loaded at the same time!).
Anyway, only SCSI devices get sg nodes; HID devices don't. In thie
case sg0 refers to the mass-storage interface of the WD MyBook device,
not the HID interface. (The HID interface corresponds to the
/class/input/input1 device, as you can see in the log.) sg1 refers to
the other, working USB device. But this isn't particularly helpful for
solving your main problem.
> On Sun, 30 Sep 2007, The Almighty Pegasus Epsilon wrote:
>
> > On 9/30/07, Alan Stern <[EMAIL PROTECTED]> wrote:
> >> "more information"?! You have provided hardly any, beyond the fact
> >> that it doesn't work!
> >
> > I'll have to disagree, I provided a rather verbose description of the
> > problem in plain english rather than technical babble, along with a
> > theory or two as to why it doesn't work, and how it might be fixed.
It's not worth arguing over.
> > input: Western Digital My Book as /class/input/input1
> > input: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:07.2-1
> > usbcore: registered new interface driver usbhid
> > drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
That's the HID interface in the composite WD MyBook device.
> > Initializing USB Mass Storage driver...
> > scsi0 : SCSI emulation for USB Mass Storage devices
> > usb-storage: device found at 2
> > usb-storage: waiting for device to settle before scanning
> > scsi1 : SCSI emulation for USB Mass Storage devices
> > usbcore: registered new interface driver usb-storage
> > USB Mass Storage support registered.
> > usb-storage: device found at 3
> > usb-storage: waiting for device to settle before scanning
> > scsi 0:0:0:0: Enclosure WD My Book Device 104a PQ: 0 ANSI: 4
> > scsi 1:0:0:0: Direct-Access WDC WD80 0BB-40BSA0 0000 PQ: 0 ANSI: 0
So both devices were registered with the SCSI core, as they would have
to be in order for both sg0 and sg1 to appear.
> > usb-storage: device scan complete
> > usb-storage: device scan complete
> > sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
> > scsi 0:0:0:0: Attached scsi generic sg0 type 13
> > sd 1:0:0:0: Attached scsi generic sg1 type 0
> > sd 1:0:0:0: [sda] Write Protect is off
> > sd 1:0:0:0: [sda] Mode Sense: 27 00 00 00
> > sd 1:0:0:0: [sda] Assuming drive cache: write through
> > sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
> > sd 1:0:0:0: [sda] Write Protect is off
> > sd 1:0:0:0: [sda] Mode Sense: 27 00 00 00
> > sd 1:0:0:0: [sda] Assuming drive cache: write through
> > sda: unknown partition table
> > sd 1:0:0:0: [sda] Attached SCSI disk
But only the other device worked with the SCSI disk driver. It's
undoubtedly because the other device (sg1) reports itself as type 0 =
disk drive and the WD device (sg0) reports itself as type 13 =
enclosure -- I don't know what that's supposed to mean. Whatever it
is, the SCSI disk driver doesn't accept it.
Now I don't know if this will work or if it's the right thing to do,
but you can try it. Edit the kernel source file drivers/scsi/sd.c.
Near the beginning is a line saying
MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK);
You can add a line saying
MODULE_ALIAS_SCSI_DEVICE(TYPE_ENCLOSURE);
Also, at the start of the sd_probe() function is this line:
if (sdp->type != TYPE_DISK && sdp->type != TYPE_MOD && sdp->type !=
TYPE_RBC)
You should add into that an extra test:
if (sdp->type != TYPE_DISK && sdp->type != TYPE_MOD && sdp->type !=
TYPE_RBC
&& sdp->type != TYPE_ENCLOSURE)
That will allow the SCSI disk driver to recognize the WD device.
Whether it will end up working correctly is a different question...
Alan Stern
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Linux-usb-users@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
