On Fri, 26 Oct 2007, Ken Rushia wrote: > I've been reading this thread, thinking it may be the problem I'm running > into > on my computer with 2.6.23. After the computer boots, the bus resets > repeatedly and a flood like this appears in messages: > > usb 1-5: new high speed USB device using ehci_hcd and address 2 > usb 1-5: new high speed USB device using ehci_hcd and address 3 > [...] > usb 1-5: new high speed USB device using ehci_hcd and address 127 > [repeat]
It seems extremely unlikely that your problem is the one referred to in the Subject line. After all, your log messages talk about ehci_hcd, not ohci_hcd. > I am using an Asus A8N32-SLI Deluxe motherboard. lspci -nnvv output can be > seen at http://forumattachments.krns1.fastmail.fm/lspci-nnvv.txt > > Have any patches for this made it into 2.6.24-rc1? I'd be happy to do any > testing required to get this issue resolved. > > While I'm here, another note; EHCI appears to have broken sometime after > 2.6.15 > on this board (USB2 flash drive hasn't worked since then). This has been > reported by others as well. I'm not sure if there is any relation between > this > and the recent reset loop issue. In what respect isn't your EHCI controller working? Can you provide dmesg logs with CONFIG_USB_DEBUG enabled? Alan Stern ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Linux-usb-users@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
