Hi,
First of all I do not hava lsusb I simply use cat /proc/bus/usb/devices
(I do not think lsusb is included in slack 8.1). I get a CDCEther driver
autoloded for some reason..
So this is the complete output:
[EMAIL PROTECTED]:~# lsmod
Module Size Used by Not tainted
acm 5056 0 (unused)
usbserial 17888 0 (unused)
CDCEther 7872 0 (unused)
ide-scsi 7456 0
8139too 13792 1
mii 1008 0 [8139too]
usb-uhci 20708 0 (unused)
usbcore 48000 1 [acm usbserial CDCEther usb-uhci]
[EMAIL PROTECTED]:~# cat /proc/bus/usb/devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=e200
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 3
P: Vendor=0bdb ProdID=101b Rev= 1.00
S: Manufacturer=Ericsson
S: Product=Ericsson G3x Fixed Wireless Terminal
S: SerialNumber=358211-00-115545
C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=08 Prot=00 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl= 16ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=serial
E: Ad=02(O) Atr=02(Bulk) MxPS= 16 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 16 Ivl= 0ms
C: #Ifs= 5 Cfg#= 2 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=08 Prot=00 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=0a Prot=81 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
I: If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
I: If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl= 16ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 16 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 16 Ivl= 0ms
C: #Ifs= 5 Cfg#= 3 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=08 Prot=00 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=0a Prot=81 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
I: If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
I: If#= 3 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=0a Prot=80 Driver=(none)
I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
I: If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 16 Ivl= 0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 16 Ivl= 0ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=e100
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
[EMAIL PROTECTED]:~# cat /proc/bus/usb/drivers
usbdevfs
hub
CDCEther
serial
acm
When I connect the device my log says:
Nov 14 20:43:39 inget kernel: hub.c: USB new device connect on bus2/1,
assigned device number 6
Nov 14 20:43:39 inget kernel: usbserial.c: Generic converter detected
Nov 14 20:43:39 inget kernel: usbserial.c: Generic converter now
attached to ttyUSB0 (or usb/tts/0 for devfs)
Then I'd like to open a connection to my phone via either minicom or cu
but nothing happen and I get no errors.
REgards Göran
Oliver Neukum skrev:
> Am Mittwoch 14 November 2007 schrieb Göran Höglund:
>> Hi
>> Yes this is what I thought.
>> But still I do not know if I shall use acm or usbserial as driver.
>> At the moment I load usbserial in rc.modules:
>> /sbin/modprobe usbserial vendor=0x0bdb product=0x101b
>>
>> Hotplug ties usbserial to /dev/ttyUSB0. I can open, but not communicate
>> with the device by either minicom or cu.
>
> Acm is autoloaded. That suggests /dev/ttyACM0. But you have cut
> away the part of the output of lsusb that'd allow me to be sure.
>
> Regards
> Oliver
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Linux-usb-users@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
