All, I've run into a bit of trouble in trying to get my Treo 650 to register with the usb driver. So... the process is as follows. I load the `visor` module [which also loads `usbserial`]. I try a hotsync operation. A new device should appear as /dev/ttyUSB1 or /dev/ttyUSB0 aliased to /dev/pilot. No devices appear. The syslog and dmesg report the following:
Nov 24 20:42:34 e521 kernel: usb 1-5: new full speed USB device using ohci_hcd and address 23 Nov 24 20:42:35 e521 kernel: usb 1-5: device descriptor read/64, error -110 Nov 24 20:42:35 e521 kernel: usb 1-5: device descriptor read/64, error -110 Nov 24 20:42:35 e521 kernel: usb 1-5: new full speed USB device using ohci_hcd and address 24 Nov 24 20:42:35 e521 kernel: usb 1-5: device descriptor read/64, error -110 Nov 24 20:42:35 e521 kernel: usb 1-5: device descriptor read/64, error -110 Nov 24 20:42:36 e521 kernel: usb 1-5: new full speed USB device using ohci_hcd and address 25 Nov 24 20:42:36 e521 kernel: usb 1-5: device not accepting address 25, error -110 Nov 24 20:42:36 e521 kernel: usb 1-5: new full speed USB device using ohci_hcd and address 26 Nov 24 20:42:37 e521 kernel: usb 1-5: device not accepting address 26, error -110 I've tried all the notes listed on the linux-usb.org FAQ page. None seem to work. Anyone have any other suggestions?? I'm running opensuse 10.1 x86_64 2.6.16.13-4-smp on a dell e521 open source desktop. thanks john ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Linux-usb-users@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
